Intel Rapid Start Technology User Guide for UEFI Mode

DISKPART>create partition primary size=YYYY
(YYYY is the hibernation partition size in megabytes for the partition. For example,
for 4 GB of system memory, this value should be 4096 or higher.)
DISKPART>detail disk
DISKPART>select Volume Z
(Z is the newly created RAW partition. Refer to results from “detail disk” for exact
volume number)
DISKPART> set id=D3BFE2DE-3DAF-11DF-BA40-E3A556D89593
DISKPART>exit
3.6. Type Exit to close the command line utility.
3.1. In the operating system, click the Windows Start button.
3.2. In the Search box, type in cmd.exe.
3.3. Right-click on the cmd.exe file and select Run as administrator.
3.4. A command line utility will open. Type in diskpart.exe and press Enter.
3.5. At the DISKPART> prompt, type the following commands, in the order shown:
DISKPART>list disk
Alternate Step 3: Create primary store partition on a non-OS SSD