Technical product specification

Product Description

1.5.1.2 Video Memory Allocation

Intel

Dynamic Video Memory Technology (DVMT) is a method for dynamically

allocating system memory for use as graphics memory to balance 2D/3D graphics and

system performance. If your computer is configured to use DVMT, graphics memory is

allocated based on system requirements and application demands (up to the

configured maximum amount). When memory is no longer needed by an application,

the dynamically allocated portion of memory is returned to the operating system for

other uses.

1.5.1.3 High Definition Multimedia Interface* (HDMI*)

The HDMI port supports standard, enhanced, or high definition video, plus multi-

channel digital audio on a single cable. The port is compatible with all ATSC and DVB

HDTV standards and supports eight full range channels at 24-bit/96 kHz audio of

lossless audio formats. The maximum supported resolution is 1920 x 1200 @ 60 Hz,

24 bpp (WUXGA). The HDMI port is compliant with the HDMI 1.4 specification.

1.5.1.3.1 Integrated Audio Provided by the HDMI Interfaces

The following audio technologies are supported by the HDMI 1.4 interfaces directly

from the SoC:

• AC-3 - Dolby* Digital

• Dolby Digital Plus

• LPCM, 192 kHz/24-bit, 8 Channel

1.6 USB

The USB port arrangement is as follows:

• Two USB 2.0 back panel connectors

• One USB 3.0 front panel connector

• One port is reserved for the PCI Express Half-Mini Card

All the USB ports are high-speed, full-speed, and low-speed capable.

NOTE

Computer systems that have an unshielded cable attached to a USB port may not meet

FCC Class B requirements, even if no device is attached to the cable. Use a shielded

cable that meets the requirements for full-speed devices.

For information about Refer to

The location of the USB connectors on the back panel Figure 10, page 36

The location of the USB connector on the front panel Figure 2, page 15