Technical product specification

Intel NUC Board NUC5i3MYBE Technical Product Specification
32
1.10.3 RJ-45 LAN Connector with Integrated LEDs
Two LEDs are built into the RJ-45 LAN connector (shown in Figure 8).
Item Description
A Link LED (Green)
B Data Rate LED (Green/Yellow)
Figure 8. LAN Connector LED Locations
Table 12 describes the LED states when the board is powered up and the LAN subsystem is
operating.
Table 12. LAN Connector LED States
LED LED Color LED State Condition
Link Green
Off LAN link is not established.
On LAN link is established.
Blinking LAN activity is occurring.
Data Rate Green/Yellow
Off 10 Mb/s data rate is selected.
Green 100 Mb/s data rate is selected.
Yellow 1000 Mb/s data rate is selected.
1.10.4 NFC Connector/Interface
The NFC connector is designed to work with an NFC reader/writer module via a 1x8 Flexible
Printed Circuit connector (0.5 mm pitch).