Technical product specification

Intel NUC Board NUC5i3MYBE Technical Product Specification
28
For information about Refer to
The location of the USB connectors on the back panel Figure 9, page 44
The location of the front panel USB headers Figure 2, page 15
1.7 SATA Interface
The board provides the following SATA interfaces:
• One internal M.2 SATA port (Type 2242 and Type 2280 Modules) for SSD support
• One SATA 6.0 Gb/s port (blue)
The PCH provides independent SATA ports with a theoretical maximum transfer rate of 6 Gb/s. A
point-to-point interface is used for host to device connections.
1.7.1 SATA Disk-on-Module (DOM) Voltage Selection Header
The board provides support for SATA Disk-on-Module (DOM) via a user-selectable voltage level
on SATA data pin 7. See Table 11 for more details.
Table 11. SATA DOM Voltage Selection Header
Pins 1 and 2 jumper position for 5 V
Pins 3 and 2 jumper position for GND
(default)