All-in-One (AIO) Integration with Thin Mini-ITX Intel Desktop Boards

AIO Integration with Thin Mini-ITX Intel® Desktop Boards – v3.0
25
Plug in the blower
Plug the 4-wire cable from the blower to the white processor fan header on the board next to the SATA
power port. The fan is PWM-controllable and has a fan tach signal output wire. The fan speed ranges from
1180 – 3380 RPM.
Finalize the integration
Before the back cover is closed, make sure the I/O shield of the Intel Desktop Board DH61AG board has not
got any metal tabs stuck in the ports and the cables inside the chassis are properly routed, especially the
optical drive power connector which is a large 4-pin Molex connector and can obstruct the back cover.