All-in-One (AIO) Integration with Thin Mini-ITX Intel Desktop Boards

AIO Integration with Thin Mini-ITX Intel® Desktop Boards – v3.0

Integrate the thermal solution

Apply the thermal interface material (TIM) to the processor. Place the heatsink into position, aligning the

board and chassis attach at the same time. Then screw the four thermal solution screws in a Z-pattern. Note:

the thermal solution goes under the chassis edge (circled)

Integrate the processor blower

Finish the thermal solution integration by securing the heat exchanger to the chassis with one screw. Then

place the blower in the chassis, aligning its three screw holes. Make sure no wires are trapped under the

blower.