All-in-One (AIO) Integration with Thin Mini-ITX Intel Desktop Boards

AIO Integration with Thin Mini-ITX Intel® Desktop Boards – v3.0
23
Installing a 3.5” hard drive
If you are using a 3.5” drive instead of an mSATA SSD: slide the drive into the cage and then secure it with
the included four screws. Place the drive assembly on the chassis pan at an angle so it slides under the back
plastic panel. Align the screw holes for the drive cage and then screw in the two screws provided to hold the
cage to the chassis pan.
Plug in a 3.5” hard drive
Plug the SATA power and SATA data cable coming from the motherboard to the back of the drive. Route the
cables in a way that they can be pressed down when the back cover is screwed in.