All-in-One (AIO) Integration with Thin Mini-ITX Intel Desktop Boards

AIO Integration with Thin Mini-ITX Intel® Desktop Boards – v3.0

LVDS connector

Insert the flat silver ribbon cable with a 40-pin LVDS connector into the board’s LVDS port on the top surface

of the board. Note: there is another similar looking port on the bottom side which is an eDP* port (embedded

DisplayPort*.) To ensure the connector is all the way in, use a screwdriver head to push in both sides of the

connector.

Front panel connector

Plug the front panel chassis cable to the board’s front panel header. This connector includes the side power

button, the HDD LED, and the reset button.