All-in-One (AIO) Integration with Thin Mini-ITX Intel Desktop Boards

AIO Integration with Thin Mini-ITX Intel® Desktop Boards – v3.0
19
Touchscreen interface
If your Mitac 650 chassis supports an optical touchscreen interface, the touch interface is implemented as a
single 1x5 USB header. Plug this cable into a single USB header (shown below next to the processor socket
on the Intel Desktop Board DH61AG board).
Flat panel backlight power and brightness
Insert the 8-pin shrouded panel power and brightness connector to the red connector next to the LVDS port.
The connector is keyed so can only be plugged in one way. Make sure you have matched the 12V vs. 19V
panel power jumper according to the panel specifications.