All-in-One (AIO) Integration with Thin Mini-ITX Intel Desktop Boards

AIO Integration with Thin Mini-ITX Intel® Desktop Boards – v3.0
18
Internal speakers
The Mitac 650 AIO has 3 watt/4 ohm stereo speakers inside which get powered directly from the board.
Connect the 4-pin white connector near the ½ length PCIe expansion slot to the internal stereo speaker
connector which is 1x4-pin, shrouded.
Wireless antenna
The Mitac AIO has two wireless (Wi-Fi) antennas pre-installed (white and black) with cables routed to the
board area. Connect the cables’ gold contacts to the wireless module. Use a fingernail or screwdriver head to
push the plug into place, till you hear a click. Route the antenna cable over the board components as shown
on the right, to prevent wire tangling.