All-in-One (AIO) Integration with Thin Mini-ITX Intel Desktop Boards

AIO Integration with Thin Mini-ITX Intel® Desktop Boards – v3.0

Integrate the board

Move all the wires away from the board area, and raise the metals tabs of the I/O shield before you install the

board. Make sure no metal tabs are going inside the back panel ports.

Insert the motherboard at an angle, aligning all the back panel ports into the IO shield. Lay the board flat and

screw in the four screws. The speaker wires go from the bottom of the chassis to the plug into the board

connector which is at the top of the board, so these cables have to be placed at the bottom of the board.

6.3 Connecting peripherals and cables

Display panel jumpers

Before plugging in any cables, change the set the board jumpers to these settings:

• Flat panel voltage: 5V

• Backlight inverter voltage: 19V