User manual

Intel® Quark™ Microcontroller Developer Kit D2000
User Guide April 2016
6 Document Number: 333966-002EN
1.2 Toolchain
The toolchain for programming the D2000 is called Intel® System Studio for
Microcontrollers.
Intel® System Studio for Microcontrollers is available at the following link:
https://software.intel.com/en-us/intel-system-studio-microcontrollers
For more details on the toolchain, see 3.0 Software and Tools.
1.3 Reference Documents
This document provides an overview of the setup process. For a successful setup,
ensure you have the documents listed in Table 2 available. These documents provide
specific information and step-by-step instructions.
Table 2. Reference Documents for This Installation
Document Document # / Location
Getting Started with Intel® System Studio for
Microcontrollers
Distributed in toolchain
Intel® System Studio 2016 for Microcontrollers User and
Reference Guide
Distributed in toolchain
Table 3. Additional Reference Documents
Document Document # / Location
Intel® Quark™ Microcontroller D2000 Datasheet www.intel.com/quark/mcu/d2000
Intel® System Studio for Microcontrollers 2016
Release Notes
Included with the S/W Distribution
Intel® Quark™ Microcontroller Software Interface BSP:
Release Notes
www.intel.com/quark/mcu/d2000
Intel® Quark™ Microcontroller D2000 Customer Reference
Board (CRB) Hardware Manual
www.intel.com/quark/mcu/d2000
Contact your Intel representative for access to these documents or click on the following
link for more information:
http://www.intel.com/content/www/us/en/embedded/products/quark/mcu/d2000/ove
rview.html