User manual

Intel® Quark™ Microcontroller Developer Kit D2000
April 2016 User Guide
Document Number: 333966-002EN 5
1.0 Introduction
This document describes Intel® Quark™ Microcontroller Developer Kit D2000
including the board, the hardware contained, and the toolchain required for software
development and debugging. The platform consists of a small form-factor board and
includes flash storage, a 6-axis compass and accelerometer and an Arduino Uno
compatible shields’ interface. A USB connection enables programming and debugging
(JTAG).
1.1 Terminology
Table 1. Terminology
Term Description
ADC Analog-to-Digital conversion
BSP Board Support Package – Refers to OS + Device Drivers
CRB Customer Reference Board
ELF Executable Linkable Format
GDB GNU Debugger
GPIO General-Purpose Input / Output
IDE Integrated Development Environment
I
2
C Inter-Integrated Circuit
JTAG Joint Test Action Group
MCU Microcontroller unit
OpenOCD Open On-Chip Debugger; interfaces with a JTAG port
QFN Quad Flat No-leads
SPI Serial Peripheral Interface
UART Universal Asynchronous Receiver / Transmitter