Datasheet

DMA Controller
Intel
®
Quark™ microcontroller D2000
Datasheet January 2016
334 Document Number: 333577-002EN
16.3.1.56 DMA Test (DMA_TEST_REG)
This register is used to put the AHB slave interface into test mode, during which the
readback value of the writable registers match the value written. In normal operation,
the readback value of some registers is a function of the DMA state and does not
match the value written.
MEM Offset (00000000) 0B07003B0h
Security_PolicyGroup
IntelRsvd False
Size 32 bits
Default 0000_0000h
Bits Access
Type
Default Description PowerWell ResetSignal
31:1 RO 31'b0 Reserved (RSV)
0 RW 1'b0 DMA Test register
(TEST_SLV_IF)
Puts the AHB slave interface
into test mode. In this mode,
the readback value of the
writable registers always
matches the value written.
This bit does not allow writing
to read-only registers.
0 = Normal mode
1 = Test mode
16.3.1.57 DMA Component ID - LOWER (DMA_COMP_ID_L)
Read-only register that specifies the version of the packaged component
MEM Offset (00000000) 0B07003F8h
Security_PolicyGroup
IntelRsvd False
Size 32 bits
Default 4457_1110h
Bits Access
Type
Default Description PowerWell ResetSignal
31:0 RO 32'h44571110 DMA Component
Version
(DMA_COMP_TYPE)
Version of the packaged
component