Datasheet

Introduction
Intel
®
Quark™ microcontroller D2000
January 2016 Datasheet
Document Number: 333577-002EN 19
1.1.11 Watchdog Timer
• Configurable Watchdog timer with support to trigger an interrupt and/or a system
reset upon timeout
1.1.12 Real Time Clock (RTC)
• 32-bit Counter running from 1Hz up to 32.768 kHz
• Supports interrupt and wake event generation upon match of programmed value
• Only requires 32.768 kHz clock to be running to generate interrupt and wake
events
1.1.13 Analog to Digital Convertor (ADC)
• 19 Analog Input channels
• Selectable 6/8/10/12-bit resolution
• Supports maximum of 2.28 Mega Samples Per Second (MSps) at 12-bit resolution
and 4 MSps at 6-bit resolution)
• Differential Non-Linearity DNL of +/- 1.0 LSB
• Integral Non-Linearity INL of +/- 2.0 LSB
• SINAD of 68 dBFS
• Offset Error of +/- 2 LSB (calibration enabled), +/- 64 LSB (calibration disabled)
• Full-scale input range of 0 to AVDD.
1.1.14 Analog Comparators
• Provides 19 Analog Comparators
• Six high performance comparators
• 13 low power comparators
• Configurable polarity
• Interrupt and Wake Event capable
1.1.15 Interrupt Routing
• Configurable Routing of SoC Interrupts with capability to route to the Interrupt
Controller of the Quark Processor.
• SoC events can be routed as: Interrupts to the Quark Processor, debug break
events to the Quark Processor or SoC Warm Reset requests.