Network Card User Manual

94 MPCMM0001 Chassis Management Module Software Technical Product Specification
The Command Line Interface (CLI)
Table 30. Dataitem Keywords Used with the Target Parameter (Sheet 1 of 4)
dataitem Description
Get/
Set
CLI Get Output Valid Set Values
listdataitems
Lists the available dataitems for
that target.
Get
Listing of all valid data items that can
be issued for the specified location
or target
N/A
health
Returns the health of the target
and if any events exist. The
returned values will be one of
OK, minor, major, or critical.
Get
"Location/Target has no/minor/major/
critical problems"
N/A
healthevents
Returns the specific health
events that are occurring on the
target if any exist.
Get
List of currently active events. E.g.
"Major Event : +12V_B Lower critical
going low asserted
Major Event : +12V_A Lower critical
going low asserted"
N/A
current The current value of a sensor. Get
"The current value is currentValue
[Units]"
N/A
thresholdsall
All thresholds of a sensor. This
includes lower non-
recoverable, lower critical,
lower non-critical, upper non-
critical, upper critical, and
upper non-recoverable.
Get
"Upper Non-recoverable:
ThresholdValue [Units]
Upper Critical:
ThresholdValue [Units]
Upper Non-critical:
ThresholdValue [Units]
Lower Non-critical:
ThresholdValue [Units]
Lower Critical:
ThresholdValue [Units]
Lower Non-recoverable:
ThresholdValue [Units]"
If a certain threshold is not
supported, the ThresholdValue will
display "Not Supported"
N/A
uppernonrecoverable
uppercritical
uppernoncritical
lowernoncritical
lowercritical
lowernonrecoverable
Used to query individual
thresholds for a value based
sensor, such as temperature or
voltage.
Get
One of the following:
“Upper Critical:
ThresholdValue [Units]”
“Upper Non-critical:
ThresholdValue [Units]”
“Lower Non-critical:
ThresholdValue [Units]”
“Lower Critical:
ThresholdValue [Units]”
“Lower Non-recoverable:
ThresholdValue [Units]”
“Lower Non-recoverable:
ThresholdValue [Units]”
N/A