Datasheet

Intel® Compute Module MFS5520VI TPS Appendix C: POST Error Messages and Handling
Revision 1.3
Intel order number: E64311-005
45
Error Code Error Message Response
0xA001 TPM device missing or not responding. Minor
0xA002 TPM device failure. Minor
0xA003 TPM device failed self test. Minor
0xA022 Processor component encountered a mismatch error. Major
0xA027 Processor component encountered a low voltage error. Minor
0xA028 Processor component encountered a high voltage error. Minor
0xA421 PCI component encountered a SERR error. Fatal
0xA500 ATA/ATPI ATA bus SMART not supported. Minor
0xA501 ATA/ATPI ATA SMART is disabled. Minor
0xA5A0 PCI Express component encountered a PERR error. Minor
0xA5A1 PCI Express component encountered a SERR error. Fatal
0xA5A4 PCI Express IBIST error. Major
0xA6A0
DXE boot services driver Not enough memory available to shadow a legacy
option ROM.
Minor
0xB6A3 DXE boot services driver Unrecognized. Major
POST Error Pause Option
In case of POST error(s) that are listed as “Major”, the BIOS enters the Error Manager and waits
for the user to press an appropriate key before booting the operating system or entering the
BIOS Setup.
The user can override this option by setting “POST Error Pause” to “disabled” in the BIOS Setup
main menu page. If the “POST Error Pause” option is set to “disabled”, the compute module
boots the operating system without user intervention. The default value is set to “disabled”.