Datasheet

Mobile Intel
®
Celeron
®
Processor (0.18µ) in BGA2 and Micro-PGA2 Packages
283654-003 Datasheet 23
Table 8. Mobile Intel Celeron Processor Absolute Maximum Ratings
Symbol Parameter Min Max Unit Notes
T
Storage
Storage Temperature –40 85 °C Note 1
V
CC
(Abs) Supply Voltage with respect to V
SS
–0.5 2.1 V
V
CCT
System Bus Buffer Voltage with respect to V
SS
–0.3 2.1 V
V
IN GTL
System Bus Buffer DC Input Voltage with respect to V
SS
–0.3 2.1 V Notes 2, 3
V
IN GTL
System Bus Buffer DC Input Voltage with respect to V
CCT
— V
CCT
+ 0.7V V Notes 2, 4
V
IN15
1.5V Buffer DC Input Voltage with respect to V
SS
–0.3 2.1 V Note 5
V
IN25
2.5V Buffer DC Input Voltage with respect to V
SS
–0.3 3.3 V Note 6
V
IN33
3.3V Buffer DC Input Voltage with respect to V
SS
–0.3 3.5 V Note 7
V
INVID
VID ball/pin DC Input Voltage with respect to V
SS
— 5.5 V
I
VID
VID Current 5 mA Note 8
NOTES:
1. The shipping container is only rated for 65°C.
2. Parameter applies to the GTL+ signal groups only. Compliance with both V
IN GTL
specifications is required.
3. The voltage on the GTL+ signals must never be below –0.3 or above 2.1V with respect to ground.
4. The voltage on the GTL+ signals must never be above V
CCT
+ 0.7V even if it is less than V
SS
+ 2.1V, or a
short to ground may occur.
5. Parameter applies to CMOS, Open-drain, APIC, and TAP bus signal groups only.
6. Parameter applies to BCLK, CLKREF, PICCLK and PWRGOOD signals.
7. Parameter applies to BSEL[1:0] signals.
8. Parameter applies to each VID pin/ball individually.