User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index
Windows 3.x/MS-DOS Installation 4-41
NDIS 2.0.1 Keywords (M16BNDIS.EXE)
KEYWORD DEFAULT VALID VALUES
COMX AUTO (X = 1, 2, 3, OR 4)
COMIRQ= AUTO (3 TO 15)
COMBASE= AUTO (0X248 TO 0X3F8)
DRIVERNAME=INTEL$ (REQUIRED FIRST ITEM IN PROTOCOL.INI)
INTERRUPT= AUTO (3 - 15)
IOADDRESS= AUTO (240 - 380)
IOWAITSTATES= 0 (1 - 3)
LINESPEED= AUTO (10 OR 100)
LINKDISABLE (NO KEYWORD = LINK INTEGRITY ENABLED)
MEMORY= AUTO (C0000 TO EE000)
MEMWAITSTATES= 0 (1 - 3)
MODE= MEM (MEM OR IO)
NOCHECK (NO KEYWORD = ADAPTER RESOURCE VERI
FICATION ENABLED)
NOCOM (NO KEYWORD = MODEM ENABLED)
NOEARLYRX (NO KEYWORD = EARLY RECEIVE ENABLED)
NOEARLYTX (NO KEYWORD = EARLY TRANSMIT ENABLED)
NOLED (NO KEYWORD = LEDS ENABLED)
SHAREIRQ
SOCKET= AUTO (1 - 4)
WORDSIZE= 16 (8 OR 16)
Packet Driver Settings (for driver
M16BPD.COM)
Packet driver parameters must be stated on the M16BPD.COM command
line when running the packet driver.
Packet Driver Configuration Notes
The Intel packet driver M16BPD.COM conforms to FTP Softwareî‚’s
public domain packet-driver specification. It is a DOS-based terminate-
and-stay-resident (TSR) program. The driver file M16BPD.COM is located
in the \PKTDRV directory on Disk 2, Network Drivers Disk.