User's Manual

Windows 3.x/MS-DOS Installation 4-17
8 Press Esc twice to bypass error messages.
9 Continue with the installation until finished.
10 Use a text editor to add the following two lines in your
CONFIG.SYS file at the location indicated by the rem statement
concerning insertion of the driver name:
DEVICE=\LSP\M16BNDIS.EXE
11 Copy M16BNDIS.EXE from the directory C:\INTEL\M16B to
the C:\LSP directory on your hard disk.
12 Use a text editor to edit the PROTOCOL.INI keyword settings in
the C:\LSP directory to match the keywords contained in the
sample PROTOCOL.INI file located at C:\INTEL\M16B as
required (unless you are using Intel PRO/100 default settings).
13 Save the files and reboot the PC.
IBM Local Area Network Support Program (version 1.2)
NDIS 2.0 Driver
1 Run the Installation Program from Intel Disk 1, Installation Disk.
2 Choose IBM LAN Support Program from the Select Network
Operating System screen.
3 Follow the prompts to complete the Intel segment of the installa-
tion.
4 Install the IBM Local Area Network Support Program according to
the instructions in the IBM Local Area Network Support Program
Users Guide. The following instructions refer to the prompts and
messages displayed with the Configuration Aid automated install
software provided with the LAN Support Program.
5 If a message appears during the LAN Support Program installation
indicating there are no IBM LAN adapters installed in the worksta-
tion, bypass the message by pressing Enter.
6 Answer [N]o to program support for the PC Network Adapter.
7 Answer [Y]es to use of programs needing the NETBIOS interface.
8 When prompted, select the Etherand Network family of network
cards.
9 Continue with the installation until finished.