User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index

4-4 PRO/100 LAN+Modem PC Card User’s Guide
The PRO/100 PC Card supports ODI, NDIS (version 2.01) and packet
drivers under Windows 3.x. To determine which of these drivers you need
for your networking environment, consult your network administrator or
network documentation.
Artisoft LANtastic version 6.0
NDIS 2.0 Driver
1 Run the Intel Installation Program from the Installation Disk.
2 Choose Artisoft LANtastic from the Select Network Operating
System screen.
3 Follow the prompts to complete the Intel segment of the installa-
tion.
4 Run the Artisoft LANtastic 6.0 install program. Specify
C:\LANTASTI as the destination directory (or the drivers directory
as specified in the Intel Installation Program).
5 At the Select network adapter screen, choose NDIS Support for
Network Adapters.
6 When prompted for the manufacturers driver disk on the Enter
NDIS driver directory screen, insert the Intel Network Drivers
Disk.
7 Complete the Artisoft installation.
8 Reboot the computer and start LANtastic.
AT&T StarGROUP LAN Manager version
2.1a
NDIS 2.0 Driver
See Microsoft LAN Manager.