User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index
Windows 3.x/MS-DOS Installation 4-3
Installation of Other Network Operating Systems
For listed network operating systems other than Novell NetWare,
highlight your network operating system and click the OK button.
6 Once you have completed the steps prompted by the Intel Installa-
tion Program, exit the program and find your network operating
system in this chapter of the Users Guide, using the Alphabetical
Reference. Follow the procedures indicated there to complete the
installation.
The Installation Program will modify your AUTOEXEC.BAT,
CONFIG.SYS, and network configuration files to match the
optimum configuration for your system.
Completing the Installation
Use the instructions in the next section Windows 3.x Network Operating
System Alphabetical Reference under the following circumstances:
To complete the installation of network drivers under Windows 3.x
after you have run the Intel Installation Program. Find your network
operating system in the alphabetical listing and follow the steps
there.
To install network drivers manually under a network operating
system not supported by the Intel Installation Program. See the
instructions under Generic Installation or Manual Installation in
the Windows 3.x Network Operating System Alphabetical Refer-
ence.
Windows 3.x Network Operating System
Alphabetical Reference
This section is organized in alphabetical order by network operating
system vendor or topic. Unless otherwise indicated, these instructions are
designed to be used with the Intel Installation Program. They assume a
first-time installation of client software on a workstation, using the
configuration values set by the Intel Installation Program or, when the
Installation Program is not used, using the default values listed in Win-
dows 3.x Network Driver Parameters Reference later in this chapter.