User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index

3-2 PRO/100 LAN+Modem PC Card User’s Guide
How Can I Tell Which Version and Service
Pack I Have?
If you don't know what version you have, follow the steps below.
If you know you have Version 4.0, skip to the Windows NT 4.0
Installation section. No additional version information is required.
If you know you have Version 3.51, follow the steps below to
determine what Service Pack version is installed. This information is
required in step 9 of the Windows NT 3.51 Installation section.
To obtain version and Service Pack information, proceed as follows:
1 Open the Windows NT Diagnostics application in the Administra-
tive Tools folder. The Administrative Tools folder can be found in
the Program Manager window (Windows NT 3.51 interface) or by
selecting Start and Programs (Windows NT 4.0 interface).
2 In the Diagnostics application, version information can be found
either by selecting the Version tab or by clicking the OS Version ...
button.
3 If the version is 3.51, be sure to note the value of the Service Pack
field:
For Windows NT Version 3.51 with Service Pack 5 or greater,
follow step 9a in the installation instructions for Windows NT
3.51.
For all other versions of Windows NT 3.51, follow step 9b in the
installation instructions for Windows NT 3.51.
Additional Information in this Chapter
This chapter also contains the following information:
Power Saving Modes
Utilities
Driver Parameters Reference