User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index
Windows 95 Installation 2-15
Caution
Under most circumstances it will not be necessary to make
modifications directly to the registry. Incorrect settings can
result in undesirable changes to the configuration of Windows
95 or NT.
The registry parameters are as follows:
Keyword Default Valid Values
DEVICEVXDS M16B.SYS
DEVLOADER NDIS
DIRECTENABLE 0 0-1
DRIVERDESC INTEL ETHEREXPRESS PRO/100
LAN+MODEM PC CARD (NETWORK)
EARLYTRANSMIT 1 0-1
ENUMPROPPAGES NETDI.DLL,ENUMPROPPAGES
FULLDUPLEX 0 0-1
FUNCTIONENABLE 0 0-2
INFPATH NETM16B.INF
INTERRUPTNUMBER 04 00 00 00
IOBASEADDRESS 02 00 00 00
LINESPEED 0 0-2
LINKINTEGRITY 1 0-1
MEMORYBASEADDRESS 01 00 00 00
MODE 0 0-1
NETWORKADDRESS
PLATFORMTYPE 1 1
TRANSMITBUFFERSIZE 11264 1024-29696
InterruptNumber, IoBaseAddress, and MemoryBaseAddress are NOT
user-configurable and their values are assigned by the Windows 95
Configuration Manager.