User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index
6-30 PRO/100 LAN+Modem PC Card User’s Guide
S37=5 Attempt to connect at 1200bps
S37=6 Attempt to connect at 2400bps
S37=7 Attempt to connect at 4800bps
S37=8 Attempt to connect at 7200bps
S37=9 Attempt to connect at 9600bps
S37=10 Attempt to connect at 12000bps
S37=11 Attempt to connect at 14400bps
S37=12 Attempt to connect at 16800bps
S37=13 Attempt to connect at 19200bps
S37=14 Attempt to connect at 21600bps
S37=15 Attempt to connect at 24000bps
S37=16 Attempt to connect at 26400bps
S37=17 Attempt to connect at 28800bps
S37=18 Attempt to connect at 31200bps
S37=19 Attempt to connect at 33600bps
S40 ETC Startup Autorating
S40=0 Start up with normal autorating (default)
S40=1 Start up at initial rate of 4800 or below
S40=2 Start up at initial rate of 9600 or below
S42 Auto Rate
V.32bis and V.22bis auto rate is disabled. Retrain operation is disabled or
enabled in date mode, and fallback is disabled in data mode.
S42=0 Auto rate disabled
S42=1 Auto rate enabled (default)
S43 Auto Mode
V.32bis startup auto mode operation disabled.
S43=0 Auto mode disabled
S43=1 Auto mode enabled (default)