User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index
2-2 PRO/100 LAN+Modem PC Card User’s Guide
For Microsoft Windows 95 4.00.950b, follow the installation
instructions under the heading Windows 95 OSR2 Installation
(OEM Version)
Additional Information in this Chapter
This chapter also contains the following Windows 95 information:
How to Install for Windows 95 and NetWare
Power Saving Modes
Utilities
Troubleshooting
Driver Parameters Reference
Windows 95 Installation (Retail Version)
Overview
Installation under the standard retail version of Windows 95 should be a
plug and play operation: Windows 95 should recognize the Intel card
when it is inserted and prompt for the Intel software disk. The Intel files
will be copied to the hard drive and the computer will restart. The country
identifier utility will launch automatically.
Important Notes
Please note the following important information before starting the install
process.
The usual path for Windows 95 files installed on your hard drive is
C:\WINDOWS\OPTIONS\CABS. The CAB files are com-
pressed versions of the Windows 95 distribution files. Organization
of the CD-ROM version of these files mirrors the diskette version:
If prompted to insert the disk labeled "Windows 95 Disk 1" the
corresponding CD-ROM file and path would be
"c:\windows\options\cabs\disk1.cab".
All the Intel files required for Windows 95 installation can be found
on Intel Disk 1.