User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index
Utilities and Applications 5-13
EtherExpress PRO/100 LAN+Modem PC Card.
d Verify that the entry in Services section matches the action you
wish to exercise.
e There is no Security category.
Lotus cc:Mail Mobile version 2.22 with Windows 3.1
1 Copy the M16BLOT.MDM file to the default directory where the
Lotus cc:Mobile *.MDM files are located.
2 Setup Lotus cc:Mobile to use this M16BLOT.MDM file as follows:
a From the Lotus cc:Mail Mobile Main Menu, select Mobile.
b Next, select Location Setup.
c In Telephone, verify that your Dialing Rules and Strings are
correct.
d In Communications, highlight Default Communications Method,
then set.
Connection Type = Modem.
Modem Type = EtherExpress PRO/100 LAN+Modem PC Card
(select the correct modem).
Serial Port = Communication Port assigned to the modem.
3 Click OK to save and close.
4 Enable SESSION.LOG to obtain the status of the modem:.
a From the Lotus cc:Mail Mobile Main Menu, select Mobile,
Mobile Setup:.
b Place a check mark under Save cc:Mail Background Session
Log.
c Place a check mark under Activate Diagnostics in cc:Mail
Background.