User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index
5-8 PRO/100 LAN+Modem PC Card User’s Guide
If the communications program is already installed, you are installing a
new modem, or your modem is not functioning, follow the instructions
for your application.
Modem Setup After Windows 95 Installation
1 Install the PRO/100 PC Card according to the instructions in
Chapter 2. Windows 95 Installation.
2 Verify modem settings as follows:
a Go to Control Panel.
b Double-click the Modem icon.
c Highlight the EtherExpress PRO/100 LAN+Modem PC Card.
d Click Properties.
e Note the Communications Port assigned to the Intel adapter
under the General tab.
f Accept the default or set the Maximum Speed of the modem.
g Use the default initialization string or modify it by clicking the
Connection Tab, then Advanced, and inputting changes on the
Extra Settings line.
3 Verify that the modem is functioning via Modem Diagnostics and
Hyperterminal.
4 Install the communications program. The Intel modem is automati-
cally configured by the communications program, if the modem is
installed prior to the communications program. During the installa-
tion process, you will be prompted to verify the Modem selection,
communications port, etc.
America Online version 3.0
America Online v.3.0 ships with a MODEM.INI file. This file must be
modified in order to use the EtherExpress PRO/100 LAN+Modem PC
Card.
1 To update the MODEM.INI file, do the following: