User's Manual
Table Of Contents
- Contents
- Hardware Installation
- Software Supplied
- Hardware Installation
- Unpacking and Inspection
- Other Required Equipment
- Installing Card and Cables
- PRO/100 Modem and Ethernet Connections
- Windows* 95 Installation
- Which Version of Windows 95?
- How Can I Tell Which Version I Have?
- Additional Information in this Chapter
- Windows 95 Installation (Retail Version)
- Windows 95 OSR2 Installation (OEM Version)
- How to Install for Windows 95 and NetWare*
- Utilities
- Power-Saving Modes
- Windows 95 Troubleshooting
- Troubleshooting Checklist
- Windows 95 Driver Parameters Reference
- Windows NT Installation
- Which Version of Windows NT?
- How Can I Tell Which Version and Service Pack I Have?
- Additional Information in this Chapter
- Windows NT 4.0 Installation
- Windows NT 3.51 Installation
- Power-Saving Modes
- Utilities
- Windows NT Driver Parameters Reference
- Windows 3.x/DOS Installation
- Installation under MS-DOS
- Windows 3.x Network Driver Parameters
- ODI Settings (for M16BODI.COM)
- Error Messages for Windows 3.x and MS-DOS Drivers
- Windows 3.x Troubleshooting
- Computer-Specific Application Notes (Windows 3.x)
- Utilities and Applications
- Utilities
- Country Identifier Utility
- Modem Test Utility
- Diagnostic Test Utility (M16BTEST.EXE)
- COM port monitor (Windows 3.x only)
- Communications Application Notes and Modem
- Modem Reference
- Result Codes
- AT Command Reference
- S-Register Reference
- Automated Customer Support
- Specifications
- Agency Notices
- Software License Agreement
- Index
CHAPTER 5
Utilities and Applications
This chapter describes software utilities provided with the PRO/100 PC
Card and provides configuration guidelines for popular communications
applications to be used with the Intel modem.
UTILITIES
Intel provides several utilities with the PRO/100 PC Card that run under
Microsoft Windows or MS-DOS. The utilities are:
Country Identifier Utility (Windows 95, NT, 3.x)
Modem Test (Windows 95, NT, 3.x)
Diagnostic Test (MS-DOS prompt required)
Modem COM Port Monitor (Windows 3.x only)
The Windows utilities described in this chapter are automatically copied to
your hard drive and launched during installation of the PRO/100 PC Card
under Windows 95 and Windows NT version 4.0, or when you run the
Intel Installation Program under Windows 3.1 or 3.11. Icons for these
utilities are also installed in the Windows program group set up at the time
of installation.
Country Identifier Utility
The Country Identifier utility is a Windows-based utility that enables the
PRO/100 PC Card user to select a country of installation setting for
modem communications. This setting enables the modem to function in
accordance with the configuration requirements of a specific country.