Datasheet

Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product
Specification
56
• LAN linked at 100 Mb/s
⎯ Load: continuous read/write benchmark on remote share
• All on board peripherals enabled (serial, audio, …)
Table 26. Maximum Load Configuration Current and Power Results
Subsystem Current Draw at 12 V Power Consumption
Minimum Load Configuration 1.591 A 19.092 W
SATA DVD-R/W 0.323 A 3.876 W
3.5-inch SATA hard disk drive 0.798 A 9.576 W
2.5-inch SATA hard disk drive 0.418 A 5.016 W
Intel Z-U130 USB Solid State Drive (or
compatible device) (D410PTLW only)
0.053 A 0.636 W
PCI cards on riser 0.118 A 1.416 W
Host-powered USB devices (other than
keyboard and mouse)
0.098 A 1.176 W
Maximum Load Configuration 3.399 A 40.788 W
2.8 Reliability
The Mean Time Between Failures (MTBF) prediction is calculated using component and
subassembly random failure rates. The calculation is based on the Bellcore Reliability
Prediction Procedure, TR-NWT-000332, Issue 4, September 1991. The MTBF
prediction is used to estimate repair rates and spare parts requirements.
The MTBF data was calculated from predicted data at 55 ºC. The Intel Desktop Board
D410PTL MTBF is 254806 hours. The Intel Desktop Board D410PTLW MTBF is 253792
hours.