Intel® Desktop Board D410PTL and Intel® Desktop Board D410PTLW Technical Product Specification January 2010 Order Number: E87536-001US Intel® Desktop Board D410PTL and Intel® Desktop Board D410PTLW may contain design defects or errors known as errata that may cause the product to deviate from published specifications. Current characterized errata are documented in the Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Specification Update.
Revision History Revision -001 Revision History Intel® First release of the Desktop Board D410PTL and Board D410PTLW Technical Product Specification. Date Intel® Desktop January 2010 This product specification applies to only the standard Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW with BIOS identifier MOPNV10N.86A. Changes to this specification will be published in the Intel Desktop Board D410PT Specification Update before being incorporated into a revision of this document.
Preface This Technical Product Specification (TPS) specifies the board layout, components, connectors, power and environmental requirements, and the BIOS for the Intel® Desktop Board D410PTL and Intel® Desktop Board D410PTLW. It describes the standard product and available manufacturing options.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Other Common Notation iv # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/sec Gigabytes per second Gbit Gigabit (1,073,741,824 bits) KB Kilobyte (1024 bytes) Kbit Kilobit (1024 bits) kbits/sec 1000 bits per second MB Megabyte (1,048,576 bytes) MB/sec Megabytes per second Mbit Megabit (1,048,576 bits) Mbit/sec Megabits per second
Contents 1 Product Description 1.1 Overview.......................................................................................... 9 1.1.1 Feature Summary .................................................................. 9 1.1.2 Board Layout ....................................................................... 11 1.1.3 Block Diagram ..................................................................... 13 1.2 Online Support................................................................................
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 2.7.1 Minimum Load Configuration.................................................. 2.7.2 Maximum Load Configuration ................................................. 2.8 Reliability ....................................................................................... 2.9 Environmental ................................................................................ 55 55 56 57 3 Overview of BIOS Features 3.
Contents Figures 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. Major Board Components.................................................................. 11 Block Diagram ................................................................................ 13 LAN Connector LED Locations ............................................................ 21 Back Panel Audio Connectors ............................................................ 23 Thermal Sensors and Fan Header..............................
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. 39. 40. 41. 42. viii Thermal Considerations for Components ............................................. Minimum Load Configuration Current and Power Results ....................... Maximum Load Configuration Current and Power Results....................... Intel Desktop Boards D410PTL and D410PTLW Environmental Specifications............................
1 Product Description 1.1 Overview 1.1.1 Feature Summary Table 1 summarizes the major features of Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW. Table 1. Feature Summary Form Factor Mini-ITX, (6.7 inches by 6.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Table 1. Feature Summary (continued) Instantly Available PC Technology • Support for PCI* Local Bus Specification Revision 2.
Product Description 1.1.2 Board Layout Figure 1 shows the location of the major components. Figure 1. Major Board Components Table 2 lists the components identified in Figure 1.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Table 2.
Product Description 1.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas. Figure 2.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 1.2 1.3 Online Support To find information about… Visit this World Wide Web site: Intel Desktop Boards D410PTL and D410PTLW http://www.intel.com/products/motherboard/D410PT/index.htm Desktop Board Support http://support.intel.com/support/motherboards/desktop Available configurations for the Intel Desktop Boards D410PTL and D410PTLW http://www.intel.com/products/motherboard/D410PT/index.
Product Description 1.3.1 Intel D410 Graphics Subsystem 1.3.1.1 Intel® Graphics Media Accelerator 3150 Graphics Controller The Intel GMA 3150 graphics controller features the following: • • 400 MHz core frequency High quality texture engine ⎯ DX9.0c* and OpenGL* 1.4 compliant ⎯ Hardware Pixel Shader 2.0 • ⎯ Vertex Shader Model 2.0 3D Graphics Rendering enhancements ⎯ 1.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 1.
Product Description Intel® NM10 Express Chipset 1.5 The Intel NM10 Express Chipset provides interfaces to the processor and the USB, SATA, LPC, LAN, and PCI interfaces. The Intel NM10 Express Chipset is a centralized controller for the board’s I/O paths. NOTE The board is designed to be passively cooled in a properly ventilated chassis. Chassis venting locations are recommended above the processor heatsink area for maximum heat dissipation effectiveness.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 1.5.2 USB The board provides up to eight USB 2.0 ports, supports UHCI and EHCI, and uses UHCI- and EHCI-compatible drivers. The port arrangement is as follows: • Eight USB 2.0 ports (D410PTL only): ⎯ Four back panel ports • ⎯ Four ports are implemented with two dual port internal headers for front panel cabling Seven USB 2.
Product Description 1.6 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with 3.3 VSB applied.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 1.
Product Description 1.8.2 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector (shown in Figure 3). Figure 3. LAN Connector LED Locations Table 4 describes the LED states when the board is powered up and the 10/100 Mbits/sec LAN subsystem is operating. Table 4.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 1.9 Audio Subsystem The board supports the Intel High Definition Audio subsystem. The audio subsystem consists of the following: • • Intel NM10 Express Chipset Realtek ALC662 audio codec The audio subsystem has the following features: • • • • • Advanced jack sense for the back panel audio jacks that enables the audio codec to recognize the device that is connected to an audio port.
Product Description 1.9.1 Audio Subsystem Software Audio software and drivers are available from Intel’s World Wide Web site. For information about Refer to Obtaining audio software and drivers Section 1.2, page 14 1.9.2 Audio Connectors and Headers The board contains audio connectors and headers on both the back panel and the component side of the board.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 1.10 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • • Thermal and voltage monitoring Chassis intrusion detection 1.10.
Product Description 1.10.2 Thermal Monitoring Figure 5 shows the locations of the thermal sensors and fan header. Item Description A Chassis fan header B Thermal diode, located on the processor die C Remote thermal sensor Figure 5.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 1.11 Power Management Power management is implemented at several levels, including: • • Software support through Advanced Configuration and Power Interface (ACPI) Hardware support: ⎯ Power connector ⎯ Fan header ⎯ LAN wake capabilities ⎯ Instantly Available PC technology ⎯ Wake from USB ⎯ Wake from PS/2 devices ⎯ Power Management Event signal (PME#) wake-up support 1.11.
Product Description 1.11.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off. The operating system uses information from applications and user settings to put the system as a whole into a low-power state.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 1.11.1.2 Wake-up Devices and Events Table 8 lists the devices or specific events that can wake the computer from specific states. Table 8.
Product Description 1.11.2 Hardware Support The board provides several power management hardware features, including: • • • • • • • • • Power connector Fan header LAN wake capabilities Instantly Available PC technology Wake from USB Wake from PS/2 devices Power Management Event signal (PME#) wake-up support WAKE# signal wake-up support +5V Standby Power Indicator LED LAN wake capabilities and Instantly Available PC technology require power from the +5 V standby line.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 1.11.2.3 Instantly Available PC Technology Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-toRAM) sleep-state. While in the S3 sleep-state, the computer will appear to be off (the hard drive(s) and fan will power off, the front panel LED will blink). When signaled by a wake-up device or event, the system quickly returns to its last known state.
Product Description 1.11.2.8 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 6 shows the location of the standby power indicator LED. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices. Figure 6.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 1.11.3 ENERGY STAR*, E-Standby, and ErP Compliance The US Department of Energy and the US Environmental Protection Agency have continually revised the ENERGY STAR requirements. Intel has worked directly with these two governmental agencies in the definition of new requirements. This Intel Desktop Board meets the ENERGY STAR requirements listed in Table 9 when used in corresponding system configurations. Table 9.
2 Technical Reference 2.1 Memory Map 2.1.1 Addressable Memory The board utilizes 4 GB of addressable system memory. Typically the address space that is allocated for PCI Conventional bus add-in cards, PCI Express configuration space, BIOS (SPI Flash), and chipset overhead resides above the top of DRAM (total system memory).
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification The amount of installed memory that can be used will vary based on add-in cards and BIOS settings. Figure 7 shows a schematic of the system memory map. All installed system memory can be used when there is no overlap of system addresses. Figure 7.
Technical Reference Table 10 lists the system memory map. Table 10. System Memory Map Address Range (decimal) Address Range (hex) Size Description 1024 K - 4096 K 100000 - 400000 4096 MB Extended memory 960 K - 1024 K F0000 - FFFFF 64 KB Runtime BIOS 896 K - 960 K E0000 - EFFFF 64 KB Reserved 800 K - 896 K C8000 - DFFFF 96 KB Potential available high DOS memory (open to the PCI bus). Dependent on video adapter used.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 2.2 Connectors and Headers CAUTION Only the following connectors/headers have overcurrent protection: Back panel and front panel USB and PS/2. The other internal connectors/headers are not overcurrent protected and should connect only to devices inside the computer’s chassis, such as fans and internal peripherals. Do not use these connectors/headers to power devices external to the computer’s chassis.
Technical Reference 2.2.1 Back Panel 2.2.1.1 Back Panel Connectors Figure 8 shows the location of the back panel connectors. Item Description A PS/2 keyboard/mouse connector B PS/2 keyboard/mouse connector C Serial port D Parallel port E VGA port F USB ports G LAN connector (RJ-45) H USB ports I Line in J Line out K Mic in Figure 8. Back Panel Connectors NOTE The back panel audio line out connector is designed to power headphones or amplified speakers only.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 2.2.1.2 I/O Shield The I/O shield provided with the board allows access to all back panel connectors and is compatible with standard mini-ITX and microATX chassis. Figure 9 shows an I/O shield reference diagram. Figure 9.
Technical Reference 2.2.2 Component-side Connectors and Headers Figure 10 shows the locations of the component-side connectors and headers. Figure 10.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Table 11 lists the component-side connectors and headers identified in Figure 10. Table 11.
Technical Reference 2.2.2.1 Signal Tables for the Connectors and Headers Table 12. Front Panel USB Header with Intel Z-U130 USB Solid-State Drive, or Compatible Device Support (D410PTLW only) Pin Signal Name Pin Signal Name 1 3 +5 VDC 2 NC D- 4 NC 5 D+ 6 NC 7 Ground 8 NC 9 KEY (no pin) 10 LED# Table 13. Chassis Fan Header Pin Signal Name 1 Ground 2 +12 V (PWM controlled pulses) 3 Tach Table 14.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Table 17. Front Panel Audio Header for AC ’97 Audio Pin Signal Name Pin Signal Name 1 MIC 2 AUD_GND 3 MIC_BIAS 4 AUD_GND 5 FP_OUT_R 6 FP_RETURN_R 7 AUD_5V 8 KEY (no pin) 9 FP_OUT_L 10 FP_RETURN_L Table 18.
Technical Reference 2.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: • • PCI Express x1 Half-Mini Card (rev 1.2 compliant) connector (D410PTLW only) PCI Conventional (rev 2.3 compliant) bus connector Note the following considerations for the PCI Conventional bus connector: • • The PCI Conventional bus connector is bus master capable. SMBus signals are routed to the PCI Conventional bus connector.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 2.2.2.4 Front Panel Header This section describes the functions of the front panel header. Table 20 lists the signal names of the front panel header. Figure 11 is a connection diagram for the front panel header. Table 20.
Technical Reference 2.2.2.4.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. Proper LED function requires a SATA storage device connected to an onboard SATA connector. 2.2.2.4.2 Reset Switch Header Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST. 2.2.2.4.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 2.2.2.5 Front Panel USB Headers Figure 12 is a connection diagram for the front panel USB headers. NOTE • • The +5 VDC power on the USB headers is fused. Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 12. Connection Diagram for Front Panel USB Header Figure 13.
Technical Reference 2.3 BIOS Configuration Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 14 shows the location of the jumper block. The jumper determines the BIOS Setup program’s mode. Table 22 lists the jumper settings for the three modes: normal, configure, and recovery. Figure 14.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Table 22. BIOS Configuration Jumper Settings Function/Mode Jumper Setting Configuration Normal 1-2 The BIOS uses current configuration information and passwords for booting. 3 2 1 Configure After the POST runs, Setup runs automatically. The maintenance menu is displayed. 2-3 3 2 1 Recovery The BIOS attempts to recover the BIOS configuration. See Section 3.7 for more information on BIOS recovery.
Technical Reference 2.4 2.4.1 Mechanical Considerations Form Factor The board is designed to fit into a mini-ITX or microATX form-factor chassis. Figure 15 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 6.7 inches by 6.7 inches [170 millimeters by 170 millimeters]. Location of the I/O connectors and mounting holes are in compliance with the microATX specification. Figure 15.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 2.5 Electrical Considerations 2.5.1 Fan Header Current Capability Table 23 lists the current capability of the fan header. Table 23. Fan Header Current Capability Fan Header Maximum Available Current Chassis fan 1.0 A 2.5.2 Add-in Board Considerations The board is designed to provide 2 A (average) of +5 V current for the PCI Conventional slot.
Technical Reference CAUTION Ensure that proper airflow is maintained in the processor voltage regulator circuit. Failure to do so may result in damage to the voltage regulator circuit. The processor voltage regulator area (shown in Figure 16) can reach a temperature of up to 85 oC in an open chassis. Figure 16 shows the locations of the localized high temperature zones. Item Description A Processor voltage regulator area B Intel Atom processor Intel NM10 Express Chipset C Figure 16.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Table 24. Thermal Considerations for Components Component Maximum Case Temperature Intel Atom processor 99 oC Processor voltage regulator area 85 oC Intel NM10 Express Chipset 113 oC Memory DIMM 85 oC For information about Refer to Processor datasheets and specification updates Section 1.2, page 14 2.6.
Technical Reference 2.6.1.2 Thermal Specifications Guideline Terms Requirements TA ≤ 50 °C TJ ≤ 100 °C ΨJA ≤ 3.85 °C/W TIM Honeywell PCM45F TDP 13 W TA external ≤ 35 °C 2.6.1.3 Heatsink Design Guideline Maximum heatsink size* 87 x 62 x 35.54 mm Heatsink mass ≤ 80 grams Retention type Spring loaded fasteners Heatsink preload 11.3 +/- 3.6 lb Note: Refers to the heatsink installed on the board. 2.6.1.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Figure 17. Fan Location Guide for Chassis Selection (Chassis Orientation is Not Restricted) For all chassis configurations, the heatsink performance parameter, ΨJA should be less than 3.85 °C/W. The detail thermal measurement metrology is described in the TMSDG. For chassis that fail to meet the thermal specifications guideline highlighted above, an actively cooled heatsink solution should be used.
Technical Reference 2.7 Power Consumption Power measurements were performed to determine bare minimum and likely maximum power requirements from the board, as well as attached devices, in order to facilitate power supply rating estimates for specific system configurations. 2.7.1 Minimum Load Configuration Minimum load refers to the power demand placed on the power supply when using a bare system configuration with minimal power requirement conditions.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification • LAN linked at 100 Mb/s • ⎯ Load: continuous read/write benchmark on remote share All on board peripherals enabled (serial, audio, …) Table 26. Maximum Load Configuration Current and Power Results 2.8 Subsystem Current Draw at 12 V Power Consumption Minimum Load Configuration 1.591 A 19.092 W SATA DVD-R/W 0.323 A 3.876 W 3.5-inch SATA hard disk drive 0.798 A 9.576 W 2.
Technical Reference 2.9 Environmental Table 27 lists the environmental specifications for the board. Table 27.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 58
3 Overview of BIOS Features 3.1 Introduction The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support. The BIOS displays a message during POST identifying the type of BIOS and a revision code. The initial production BIOSs are identified as MOPNV10J.86A.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Table 28 lists the BIOS Setup program menu features. Table 28.
Overview of BIOS Features 3.4 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network. The main component of SMBIOS is the Management Information Format (MIF) database, which contains information about the computing system and its components. Using SMBIOS, a system administrator can obtain the system types, capabilities, operational status, and installation dates for system components.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 3.5 Legacy USB Support Legacy USB support enables USB devices to be used even when the operating system’s USB drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and to install an operating system that supports USB. By default, Legacy USB support is set to Enabled. Legacy USB support operates as follows: 1. When you apply power to the computer, legacy support is disabled.
Overview of BIOS Features 3.6 BIOS Updates The BIOS can be updated using either of the following utilities, which are available on the Intel World Wide Web site: • • Intel® Express BIOS Update utility, which enables automated updating while in the Windows environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM, or from the file location on the Web.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 3.6.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel® Integrator’s Toolkit that is available from Intel can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo.
Overview of BIOS Features 3.7.3 Booting Without Attached Devices For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system loader is invoked even if the following devices are not present: • • • Video adapter Keyboard Mouse 3.7.4 Changing the Default Boot Device During POST Pressing the key during POST causes a boot device menu to be displayed.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 3.8 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer.
4 Board Status and Error Messages 4.1 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s speaker to beep an error message describing the problem (see Table 33). Table 33. BIOS Beep Codes Type Pattern F2 Setup/F10 Boot Menu One 0.5 second beep when BIOS is ready to Prompt accept keyboard input Frequency 932 Hz BIOS update in progress None Video error On-off (1.0 second each) two times, then 2.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 4.2 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board’s front panel power LED to blink an error message describing the problem (see Table 34). Table 34. Front-panel Power LED Blink Codes Type Pattern Note F2 Setup/F10 Boot Menu None Prompt 4.3 BIOS update in progress Off when the update begins, then on for 0.5 seconds, then off for 0.5 seconds.
Board Status and Error Messages 4.4 Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h. This code is useful for determining the point where an error occurred. Displaying the POST codes requires a PCI bus add-in card, often called a POST card. The POST card can decode the port and display the contents on a medium such as a seven-segment display.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Table 37.
Board Status and Error Messages Table 37.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Table 37.
Board Status and Error Messages Table 38.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 74
5 Regulatory Compliance and Battery Disposal Information 5.1 Regulatory Compliance This section contains the following regulatory compliance information for Intel Desktop Boards D410PTL and D410PTLW: • • • • • 5.1.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 5.1.2 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel® Desktop Board D410PTL and Intel® Desktop Board D410PTLW is in conformity with all applicable essential requirements necessary for CE marking, following the provisions of the European Council Directive 2004/108/EC (EMC Directive) and 2006/95/EC (Low Voltage Directive).
Regulatory Compliance and Battery Disposal Information Portuguese Este produto cumpre com as normas da Diretiva Européia 2004/108/EC & 2006/95/EC. Español Este producto cumple con las normas del Directivo Europeo 2004/108/EC & 2006/95/EC. Slovensky Tento produkt je v súlade s ustanoveniami európskych direktív 2004/108/EC a 2006/95/EC. Slovenščina Izdelek je skladen z določbami evropskih direktiv 2004/108/EC in 2006/95/EC.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Español Como parte de su compromiso de responsabilidad medioambiental, Intel ha implantado el programa de reciclaje de productos Intel, que permite que los consumidores al detalle de los productos Intel devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado. Consulte la http://www.intel.
Regulatory Compliance and Battery Disposal Information Russian В качестве части своих обязательств к окружающей среде, в Intel создана программа утилизации продукции Intel (Product Recycling Program) для предоставления конечным пользователям марок продукции Intel возможности возврата используемой продукции в специализированные пункты для должной утилизации. Пожалуйста, обратитесь на веб-сайт http://www.intel.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Table 40. Lead-Free Board Markings Description Mark nd Lead-Free 2 Level Interconnect: This symbol is used to identify electrical and electronic assemblies and components in which the lead (Pb) concentration level in the board substrate and the solder connections from the board to the components (secondlevel interconnect) is not greater than 0.1% by weight (1000 ppm).
Regulatory Compliance and Battery Disposal Information 5.1.4 EMC Regulations Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW comply with the EMC regulations stated in Table 41 when correctly installed in a compatible host system. Table 41. EMC Regulations Regulation Title FCC 47 CFR Part 15, Subpart B Title 47 of the Code of Federal Regulations, Part15, Subpart B, Radio Frequency Devices. (USA) ICES-003 Issue 4 Interference-Causing Equipment Standard, Digital Apparatus.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification Korean Class B statement translation: this is household equipment that is certified to comply with EMC requirements. You may use this equipment in residential environments and other non-residential environments. 5.1.5 Product Certification Markings (Board Level) Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW have the product certification markings shown in Table 42: Table 42.
Regulatory Compliance and Battery Disposal Information 5.2 Battery Disposal Information CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRECAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij.
Regulatory Compliance and Battery Disposal Information AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Intel Desktop Board D410PTL and Intel Desktop Board D410PTLW Technical Product Specification 86
