System Handbook

~ · In Col l aboration with
- TTL s P e a g
~ CALIBRATION LABORATORY
Add: No .SI Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: [phone]-2079 Fax: [phone]-2504
E-mail: [e-mail]
http://www.chinattl.cn
DASYS Validation Report for Body TSL Date: 03.06.2019
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 1750 MHz; Type: D1750V2; Serial: D1750V2 - SN: 1112
Communication System: UID 0, CW; Frequency: 1750 MHz; Duty Cycle: 1: 1
Medium parameters used:
f= 1750 MHz; a= 1.465 S/m; Er= 53.49; p = 1000 kg/m3
Phantom section: Center Section
DASY5 Configuration:
• Probe: EX3DV4 - SN3617; ConvF(8.03, 8.03,
8.03)@ 1750 MHz; Calibrated:
1/
31 /2019
• Sensor-Surface: 1.4mm (Mechanical Surface Detection)
• Electronics: DAE4 Sn1331; Calibrated: 2/6/2019
• Phantom: MFP _
V5.1C; Type: QD 000 P51CA; Serial: 1062
• Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12
(7450)
System Performance Check/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 91.64 V/m; Power
Drift= 0.03 dB
Peak SAR (extrapolated)= 17.0 W/kg
SAR(l g) = 9.25 W /kg; SAR(lO g) = 4.92 W /kg
Maximum value of SAR (measured)= 14 .3 W/kg
dB
0
-3.29
-6.58
-
9.86
-13.15
-16.44
L.
0 dB= 14.3 W/kg = 11.55 dBW/kg
Certificate No: Z19-60057
Page 7
of8