System Handbook

~ · lnCollabomtionwith
- TTL s P e a g
CAUBaATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: [phone]-2079 Fax: [phone]-2504
E-mail: [e-mail] http://www.chinattl.cn
DASYS Validation Report for Head TSL Date: 03.06.2019
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 1750 MHz; Type: D1750V2; Serial: D1750V2 - SN: 1112
Communication System: UID 0, CW; Frequency: 1750 MHz; Duty Cycle: 1: 1
Medium parameters used:
f= 1750 MHz; a= 1.389 Sim; Er= 41.13; p = 1000 kg/m3
Phantom section: Right Section
DASY5 Configuration:
• Probe: EX3DV4 - SN3617; ConvF(8.38, 8.38,
8.38)@ 1750 MHz; Calibrated:
1/31/2019
• Sensor-Surface: 1.4mm (Mechanical Surface Detection)
• Electronics: DAE4 Sn1331; Calibrated: 2/6/2019
• Phantom: MFP _
V5.1C; Type: QD 000 P51CA; Serial: 1062
• Measurement SW: DASY52, Version 52.10 (2); SEMCAD X Version 14.6.12
(7450)
System Performance Check/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid:
dx=5mm, dy=5mm, dz=5mm
Reference Value = 93.87 V/m; Power
Drift= 0.00 dB
Peak SAR (extrapolated)= 17.3 W/kg
SAR(l g) = 9.2 W/kg; SAR(lO g) = 4.87 W/kg
Maximum value of SAR (measured) = 14.4 W/kg
dB
0
-3.36
-6.72
-10.07
-13.43
-16.79
L.
0 dB= 14.4 W/kg = 11.58 dBW/kg
Certificate No: Z 19-60057
Page 5 of8