Intel® IP Network Server Intel® NSW1U (1Ux20”D) Configuration Guide System / Spares / Accessories List Rev 1.
May 2007 INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT.
Document Table of Contents I. CHANGE HISTORY 6 II. INTRODUCTION 7 III. PRODUCTION SKUS 9 IV. PRODUCTION SPARES/ACCESSORY LIST 17 V. ADDING BYPASS ETHERNET PORTS 21 VI. DOCUMENTATION 23 APPENDIX A. BASE MODEL 0 SYSTEMS CONFIGURATION 24 APPENDIX B. RACK MOUNTING OPTIONS FOR 1U AND 2U INTEL® COMMUNICATIONS RACK MOUNT SERVERS 27 5/18/2007 v1.
I. Change History Revision 1.0 1.1 1.2 Date Comments 11/10/2006 Original version. 3/19/2007 Updated at SRA. Added Front NIC Bypass SKU. 5/17/2007 Updated Spares list; new Rack Mount appendix; misc. updates 5/18/2007 v1.
II. Introduction The Intel® IP Network Server NSW1U system is the first 1U rack mount server to join the Intel® IP Network Server family, characterized by having long product life and a 20” depth chassis. The NSW1U uses the Dual-Core Intel® Xeon® Processor 5100 Series with 4M cache, and supports a number of CPU speeds. Intel® IP Network Servers are suited to a host of applications in the network security and industrial environment.
III. Production SKUs Intel IP Network Servers: Production NSW1U Server – Rear NIC (AC Supply) - Product Code NSWA0201W Production NSW1U Server – Rear NIC (DC Supply) - Product Code NSWD0201W Production NSW1U Server – Front NIC (AC Supply) - Product Code NSWA0301W Production NSW1U Server – Front NIC with Bypass (AC Supply) - Product Code NSWA0401W All listed Production SKUs are model 0 SKUs (no CPU, heatsink, memory, hard drive or plug-in adapters are provided).
Special instructions for Ordering of Processors: The NSW1U supports a range of processor speeds from 1.6 GHz to 3.0 GHz. Ordering details for the CPU for use in NSW1U are listed below, and includes both Tray (for OEMs) and Boxed (Retail channel) processors. Dual-Core Intel® Xeon® Processors Supported by NSW1U: Processor Number Speed FSB TDP Boxed Processor Product Code Tray Processor Product Code 5160 5150 5140 5130 5120 5110 LV 5148 LV 5128 3.00 GHz 2.66 GHz 2.33 GHz 2.00 GHz 1.86 GHz 1.6 GHz 2.
The Production SKUs that can be ordered (see Appendix A for content of each SKU) are listed below. PID Order Code Description MM# Minimum Order Size NSWA0201W Intel® IP Network Server NSW1U, 1U, Rear NIC, Base Model 0*. Includes 450W AC Power Supply. 885432 1 NSWD0201W Intel® IP Network Server NSW1U, 1U, Rear NIC, Base Model 0*. Includes 450W DC Power Supply. 885433 1 NSWA0301W Intel® IP Network Server NSW1U, 1U, Front NIC, Base Model 0*. Includes 450W AC Power Supply.
IV. Production Spares/Accessory List Below are the Spares parts and Accessories that may be ordered with the NSW1U system. Any of these parts may be ordered as spares for part replacement purposes or as additional customer inventory. Some of the parts below are not included in the NSW1U system base model and may be ordered as accessories for purposes of upgrading the base model to include additional features. Many of these parts are common to the Intel® Carrier Grade Server TIGW1U product.
Production Spares/Accessories List (continued) PID Order Code NSWFBZL01W Description Contents Bezel NSW1U Bezel - Rear NIC Included in Base Model (Y/N) MM# Minimum Order Size Y 886614 1 886615 1 one in Rear NIC SKU NSWFBZL02W Bezel NSW1U Bezel – Front NIC Y one in Front NIC SKU Bracket for chassis face N NSI2U Fiber Escutcheon packaged in cartons of 48 Escutcheons (48-pack) N NSW1U CD-ROM filler CD filler N 886841 1 NSWSATAHDD01W NSW1U SATA HDD Carriers 2 carriers Y 886589
V. Adding Bypass Ethernet ports The NSW1U comes standard with 4 Gb Ethernet ports either in the front or rear of the chassis. By adding the Intel® Pro/1000 PT or PF Quad Port Bypass Server Adapter, four additional ports of Gbit ethernet (either Copper or Fiber) may be added. These NIC adapters may be purchased separately via normal distribution channels.
VI. Documentation More Product Details: Check the following web site for more information on the TIGW1U: http://www.intel.com/design/telecom/products/cbp/ipserver/9979/overview.h tm Support.Intel.Com Users: Product information including specifications, compatibility, user’s guides, drivers, firmware, and software associated with the Intel® Network Server NSW1U is available from Intel Customer Support. Intel® Network Server NSW1U support web site: http://support.intel.
Appendix A. Base Model 0 Systems Configuration All Production SKUs are base model 0 SKUs (no CPU, heatsink, memory, hard drive or plug-in adapters are provided). Those components must be ordered separately as Accessories from Intel or from third party vendors listed in the Tested Hardware and Operating System List (THOL). The below table lists how many of each component is included in the Production model 0 SKU.
Appendix B. Rack Mounting Options for 1U and 2U Intel® Communications Rack Mount Servers Rack mounting kits for 2-post or 4-post, 19-inch or 23-inch racks are offered for this product. Please refer to the tables below for the correct options to suit your needs. All rack mount kits listed are suitable for 1U and 2U Intel® Communications Rack Mount Servers. Installation instructions are included in each kit.
TMLCMOUNT21 The TMLCMOUNT21 kit mounts Intel® Communication Rack Mount Servers to a 2post, central office type, 19” wide rack. This kit consists of simple L-shaped brackets; which fasten to the sides of the server and to the rack. TMLCMOUNT21 5/18/2007 v1.
TMLPMOUNT41, TMLPMOUNT51 and TMLPMOUNT52 TMLPMOUNT41/51/52 series mounts Intel® Communication Rack Mount Servers to 2-post or 4-post racks. TMLPMOUNT41 and TMLPMOUNT51 are used for mounting servers on 19” wide racks. These racks are considered standard EIA (universal hole spacing) racks. TMLPMOUNT52 is used for mounting servers on 23” wide racks. These racks could be standard EIA (universal or wide hole spacing) or ETSI (European) racks.
4. EIA-Wide spacing doesn't have the interstitial hole that is present in EIAUniversal. TMLPMOUNT51 contains an adapter bracket to overcome this EIA-Wide issue. 5. This component (2U Nut Bar) enables installation of a rail kit into a 1U rack slot when there is already equipment installed both above and below that open slot. 6. The sides of the server must be accessible when using TMLPMOUNT41 in 2post racks. 5/18/2007 v1.
The diagrams above summarize the components and “slide-in rail-type” system of the TMLPMOUNT41. It can be adapted for a 2-post or 4-post installation. 5/18/2007 v1.
The main difference between the TMLPMOUNT41 and TMLPMOUNT51/52 series is that the TMLPMOUNT41 series uses a screw to lock the server in place via the Universal Mounting Bracket, whilst the TMLPMOUNT51/52 series has an additional Slide Pull-Out Locking feature. The Universal Front Mounting Bracket on the TMLPMOUNT41 The Slide Pull-Out Locking feature on the TMLPMOUNT51/52 5/18/2007 v1.
TMLPSLIDE01 The TMLPSLIDE01 is an accessory kit designed for use in conjunction with slide rails to produce a rack mounted serviceable server. The TMLPSLIDE01 kit contains two Universal Front Mounting Brackets that secure the server to the front of the rack. The sliding rails and optional mounting brackets required to mount the server must be purchased through the channel. For example, the Accuride 22-inch Model 305A-LR slide rails are designed to mount a server for “in-rack service.
Customers should order RoHS items for shipments going to the European Union (EU). Although these mounts have been designed for industry standard racks, please consult with your Intel Field Application or Sales Engineer before selecting racks for these servers. Compatible rack mounting kits may also be obtained from 3rd party suppliers. 5/18/2007 v1.
