User's Manual

ManualsBrandsIntel ManualsNetwork CardIntel Intel Network Card Revision 1.1

Table Of Contents

Intel® PRO/Wireless 2100 Network Connection Software

Administrators Installation Guide

Revision 1.1

March 7, 2005

Intel Customer Support

Summary of content (10 pages)

PAGE 1
Intel® PRO/Wireless 2100 Network Connection Software Administrators Installation Guide Revision 1.
PAGE 2
Intel® PRO/Wireless 2100 Network Connection Software Administrators Installation Guide, Rev. 1.1 THE INFORMATION IN THIS MANUAL IS FURNISHED FOR INFORMATIONAL USE ONLY, IS SUBJECT TO CHANGE WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY INTEL CORPORATION. INTEL CORPORATION ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS DOCUMENT OR ANY SOFTWARE THAT MAY BE PROVIDED IN ASSOCIATION WITH THIS DOCUMENT.
PAGE 3
Intel® PRO/Wireless 2100 Network Connection Software Administrators Installation Guide, Rev. 1.1 Document Revision History Document Revision Number Date 1.1 March 7, 2005 ICS v1.
PAGE 4
Intel® PRO/Wireless 2100 Network Connection Software Administrators Installation Guide, Rev. 1.1 Contents 1 Introduction ............................................................................................................................... 1 1.1 Scope ................................................................................................................................ 1 2 PRO/Wireless 2100 Software Driver ...................................................................................
PAGE 5
Intel® PRO/Wireless 2100 Network Connection Software , Rev. 1.1 1 Introduction This document describes how to install, configure, and uninstall Intel® PRO/Wireless 2100 LAN MiniPCI Adapter software. This software is used to configure and manage Intel wireless LAN products supporting the 2.4-GHz 802.11b IEEE specification. 1.
PAGE 6
Intel® PRO/Wireless 2100 Network Connection Software , Rev. 1.1 2 PRO/Wireless 2100 Software Driver This chapter provides an overview of the SetupWLD Wrapper. Additionally, it provides the installation procedure and command line options available to the SetupWLD Wrapper for Microsoft Windows 2000 and Microsoft Windows XP. 2.
PAGE 7
Intel® PRO/Wireless 2100 Network Connection Software , Rev. 1.1 2.3 Additional Command Line Options Options 2.4 Meaning -Silent or /Silent Do not display any progress dialog boxes or error messages -NoReboot or /NoReboot Forces no reboot even if reboot is required after the install. Upgrading the Driver To upgrade using the SetupWLD Wrapper, simply run the standard SetupWLD Wrapper installation procedure described in section 2.1.
PAGE 8
Intel® PRO/Wireless 2100 Network Connection Software , Rev. 1.1 3 PROSet Software The following sections contain the procedures for launching and installing the Intel® PROSet/Wireless Software application and using PROSet command line options. 3.1 Launching the PROSet Installer This section describes how to launch the PROSet Installer with Autorun enabled or with Autorun disabled. 3.1.1 Launching the PROSet Installer with Autorun Enabled 1. Insert the installation CD and wait a few seconds. 2.
PAGE 9
Intel® PRO/Wireless 2100 Network Connection Software , Rev. 1.1 3.2.2 Custom Installation Custom setup allows you to select additional software features to install.
PAGE 10
Intel® PRO/Wireless 2100 Network Connection Software , Rev. 1.1 Keys AVAIL_NETS= Parameters 0 Representation 0 – Checkbox is unchecked for “Display Available Networks when not associated”. 1 1 – Checkbox is checked for “Display Available Networks when not associated”. MSZCFG= 0 0 disables Windows XP Zero Config. 1 1 is the default. A synonym for the “WZC=” option. NTFY_PMDSBL= 0 0 – Checkbox is unchecked for “Notify when disabling Profile Management features”.