Embedded Intel® AtomTM Processor D2700 with Intel® NM10 Express Chipset Development Kit User’s Manual February 2012 Order Number: 326544
Revision History Revision Revision History Date ® TM 001 First release of the Intel Atom D2700 Processor with NM10 Express Chipset Development Kit User‘s Manual January 2012 002 Updated link in Section 7 February 2012 This product specification applies to only the standard Intel ® Embedded Board D2700 with BIOS identifier CCCDT10N.86A. INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS.
Component Information The Intel® AtomTM Processor D2700 and NM10 Express Chipset used on the Intel® Embedded Board D2700 include the following component stepping, identifiable by associated S-Spec numbers: Device Stepping S-Spec Number D2700 B2 SR0D9 NM10 B0 SLGXX Ordering Information The name of this Development Kit is the Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit. This document is the user guide for this Kit.
Embedded Intel® AtomTM Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Preface This User‘s Manual specifies the typical hardware set-up procedures, features, and use of the evaluation board and other components included in the Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit. The Intel® Embedded Board D2700 is mounted inside the Development Kit and functions as the mainboard for the entire mini-ITX chassis.
Intel ® AtomTM D2700 Processor with NM10 Express Chipset Development Kit User’s Manual Other Common Notations # Used after a signal name to identify an active-low signal (such as USBP0#) GB Gigabyte (1,073,741,824 bytes) GB/s Gigabytes per second Gb/s Gigabits per second KB Kilobyte (1024 bytes) Kb Kilobit (1024 bits) kb/s 1000 bits per second MB Megabyte (1,048,576 bytes) MB/s Megabytes per second Mb Megabit (1,048,576 bits) Mb/s Megabits per second TDP Thermal Design Power xxh
Embedded Intel® AtomTM Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Contents 1 Development Kit Contents ................................................... 12 1.1 Included Hardware and Documentation ............................................... 12 1.2 Development Kit Images ................................................................... 13 1.2.1 Front ................................................................................... 13 1.2.2 Inside .................
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.13.1 ACPI ............................................................................. 36 2.13.2 Hardware Support ................................................................. 39 2.14 Debug Interfaces .............................................................................. 42 3 Technical Reference ............................................................ 43 3.1 Memory Map ..................
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 6 Assembly/Disassembly Guide ............................................. 84 6.1 6.2 6.3 6.4 6.5 Introduction ..................................................................................... 84 Required tools .................................................................................. 84 Board Installation Steps ....................................................................
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Figures Figure 1. Major Board Components (Top) ....................................................... 16 Figure 2. Block Diagram of Development Kit ................................................... 18 Figure 3. Memory Channel and SO-DIMM Configuration ................................... 24 Figure 4. LAN Connector LED Locations .......................................................... 31 Figure 5.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 10. System Memory Map ..................................................................... 45 Table 11. Component-side Connectors and Headers Shown in Figure 11 ............ 50 Table 12. TPM Header .................................................................................. 51 Table 13. Serial Port Headers ....................................................................... 51 Table 14.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 1 Development Kit Contents 1.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 1.2 Development Kit Images 1.2.1 Front 1.2.2 Inside 1.2.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2 Intel® Embedded Board D2700 Overview 2.1 Overview 2.1.1 Feature Summary Table 1 summarizes the features of Intel® Embedded Board D2700. Table 1. Feature Summary Form Factor of D2700 Embedded Board Mini-ITX (6.7 inches by 6.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 1.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.1.2 Board Layout Figure 1 shows the location of the major components. Figure 1.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 2 lists the components identified in Figure 1. Table 2.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.1.3 Block Diagram Figure 2 is a block diagram of the major functional areas of the Intel® Embedded Board D2700. Figure 2.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.2 Online Support For information about… ® TM Visit this web site: Intel Atom Processor D2700 and NM10 Express Chipset Platform Overview http://www.intel.com/p/en_US/embedded/hwsw/hardware/atom -n2000-d2000/overview Chipset information http://www.intel.com/products/desktop/chipsets/index.htm (Search for NM10 Express Chipset) BIOS and driver updates http://downloadcenter.intel.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.4 BIOS vendors The BIOS vendors are: BIOS vendors American Megatrends* Insyde Software* Phoenix Technologies Byosoft* 2.5 Processor The board has a passively-cooled, soldered-down Dual-Core Intel® AtomTM processor D2700 with integrated graphics and integrated memory controller. NOTE The board is designed to be passively cooled in a properly ventilated chassis.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.5.1 Intel® Embedded Board D2700 Graphics Subsystem 2.5.1.1 Intel® Graphics Media Accelerator 3600 Graphics Controller (Intel® GMA) The Intel® AtomTM Processor D2700 contains an integrated graphics core, the Intel® GMA 3600 graphics controller, which features the following functionalities: • High quality texture engine • • • • • • • • • • • • • • • • • DirectX* 9.0c and OpenGL* 3.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 3 summarizes the resolution support of the graphics interfaces. Table 3. Summary of the Resolution of the Graphics interfaces Interface Max Resolution Remark LVDS (Single Ch) 1440 x 900 60 Hz; 18 & 24 bpps VGA (CRT/DAC) 1920 x 1200 60 Hz at 355 MHz Max DVI/HDMI 1920 x 1200 60 Hz; up to 165MHz 2.5.1.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual NOTE To be fully compliant with all applicable DDR3 SDRAM memory specifications, the board should be populated with SO-DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Figure 3 illustrates the memory channel and SO-DIMM configuration. Figure 3.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Intel® NM10 Express Chipset 2.7 The Intel® NM10 Express Chipset with Direct Media Interface (DMI) interconnect provides interfaces to the processor and the USB, SATA, LPC, LAN, PCI, and PCI Express interfaces. The Intel® NM10 Express Chipset is a centralized controller for the board‘s I/O paths. NOTE The board is designed to be passively cooled in a properly ventilated chassis.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 25 MHz to 112 MHz single–channel; @18 or 24 bpp TFT panel type Panel fitting, panning, and center mode CPIS 1.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Maximum and Minimum Inverter Current Limit (%): allows the system integrator to set maximum PWM%, as appropriate, according to the power requirements of the internal flat panel display and the selected inverter board. Panel Power Sequencing: allows the system integrator to adjust panel sequencing parameters, if necessary.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual resource steering is used. Native mode is the preferred mode for configurations using the Windows Vista* operating system. For information about Refer to Obtaining AHCI driver Section 2.2 The location of the SATA connectors Figure 11 2.8 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.9.1 Serial Ports The four serial ports (two back panel connectors and two internal headers) support data transfers at speeds up to 115.2 kb/s with BIOS support. For information about Refer to The location of the serial port connectors Figure 9 2.9.2 Parallel Port Use the BIOS Setup program to set the parallel port mode for the 25-pin D-Sub parallel port header.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.10.3 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connectors (shown in Figure 4). Figure 4. LAN Connector LED Locations Table 5 describes the LED states when the board is powered up and the Ethernet LAN subsystem is operating. Table 5.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.11 Audio Subsystem The board supports the Intel® High Definition Audio (Intel® HD Audio) subsystem. The audio subsystem consists of the following: Intel® NM10 Express Chipset Realtek* ALC662 audio codec The audio subsystem has the following features: Advanced jack sense for the back panel audio jacks that enables the audio codec to recognize the device that is connected to an audio port.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.11.1 Audio Subsystem Software Audio software and drivers are available from Intel‘s web site. For information about Refer to Obtaining audio software and drivers Section 2.2 2.11.2 Audio Connectors and Headers The board contains audio connectors and headers on both the back panel and the component side of the board.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.12 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: Thermal monitoring Voltage monitoring 2.12.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.12.2 Thermal Monitoring Figure 6 shows the locations of the thermal sensors and fan header. Item Description A B C Remote thermal sensor DTS, located on the processor die System fan header Figure 6.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.13.1.1 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.13.1.2 Wake-up Devices and Events Table 9 lists the devices or specific events that can wake the computer from specific states. Table 9.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.13.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.13.2.3 Instantly Available PC Technology Instantly Available PC technology enables the board to enter the ACPI S3 (Suspend-toRAM) sleep-state. While in the S3 sleep-state, the computer will appear to be off (the hard drive(s) and fan will power off, the front panel LED will blink). When signaled by a wake-up device or event, the system quickly returns to its last known state.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.13.2.9 +5 V Standby Power Indicator LED The +5 V standby power indicator LED shows that power is still present even when the computer appears to be off. Figure 7 shows the location of the standby power indicator LED. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 2.14 Debug Interfaces The following debug support is provided on the Intel ® Embedded Board D2700: XDP (Extended Debug Port) connector supporting 3.3V JTAG is provided at location J22 (on the reverse side of the board) for processor run control debug support. Two back panel serial ports and additional onboard headers provide UART connectivity (see Section 3.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3 Technical Reference 3.1 Memory Map 3.1.1 Addressable Memory The board utilizes 4 GB of addressable system memory. Typically the address space that is allocated for Conventional PCI bus add-in cards, PCI Express configuration space, BIOS (SPI Flash), and chipset overhead resides above the top of DRAM (total system memory).
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual The amount of installed memory that can be used will vary based on add-in cards and BIOS settings. Figure 8 shows a schematic of the system memory map. All installed system memory can be used when there is no overlap of system addresses. Figure 8.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 10 lists the system memory map. Table 10. System Memory Map Address Range (decimal) Address Range (hex) Size Description 1024 K - 4194304 K 100000 - FFFFFFFF 4095 MB Extended memory 960 K - 1024 K F0000 - FFFFF 64 KB Runtime BIOS 896 K - 960 K E0000 - EFFFF 64 KB Reserved 800 K - 896 K C8000 - DFFFF 96 KB Potential available high DOS memory (open to the PCI bus).
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.2 Connectors and Headers CAUTION Only the following connectors/headers have overcurrent protection: Back panel and front panel USB, VGA, serial, and PS/2. The other internal connectors/headers are not overcurrent protected and should connect only to devices inside the computer’s chassis, such as fans and internal peripherals.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.2.1 Back Panel 3.2.1.1 Back Panel Connectors Figure 9 shows the location of the back panel connectors. Item Description A PS/2 mouse port B PS/2 keyboard port C Serial port connector D Serial port connector E VGA connector F DVI-I connector G LAN port H USB 2.0 ports I LAN port J USB 2.0 ports K Line in L Line out M Mic in Figure 9.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.2.1.2 I/O Shield The I/O shield provided with the board allows access to all back panel connectors and is compatible with standard mini-ITX and microATX chassis. As an added benefit for system configurations with wireless PCI Express Mini Card solutions, the I/O shield also provides pre-cut holes for user installation of up to three external wireless antenna.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.2.2 Component-side Connectors and Headers Figure 11 shows the locations of the component-side connectors and headers. Figure 11.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 11 lists the component-side connectors and headers identified in Figure 11. Table 11.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.2.2.1 Signal Tables for the Connectors and Headers Table 12. TPM Header Pin Signal Name Pin Signal Name 1 CK_33M_TPM_DIP 2 Ground 3 LFRAME# 4 Key (no pin) 5 PLTRST# 6 No connection 7 LAD3 8 LAD2 9 +3.3 V 10 LAD1 11 LAD0 12 Ground 13 No connection 14 No connection 15 +3.3 VSB 16 TPM_SERRQ 17 Ground 18 TPM_CLKRUN# 19 LPCPD# 20 No connection Table 13.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 14. LVDS Data Connector Pin Signal Name Pin Signal Name 1 EVEN_Lane3_P 21 N/C 2 EVEN_Lane3_N 22 EDID_3.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 15. Backlight Inverter Voltage Selection Jumper Voltage Jumper Setting Configuration 3.3 V 2 and 4 Jumper position for 3.3 V (default) 5V 6 and 4 Jumper position for 5 V 12 V 3 and 4 Jumper position for 12 V Table 16.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 18. System Fan Header Pin Signal Name 1 Ground 2 +12 V (PWM controlled pulses) 3 Tach Table 19. SATA Connectors Pin Signal Name 1 Ground 2 TXP 3 TXN 4 Ground 5 RXN 6 RXP 7 Ground Table 20. Front Panel Wireless Activity LED Header Pin Signal Name 1 Ground 2 MINICARD_WLAN# Table 21.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 23. Front Panel USB 2.0 Headers Pin Signal Name Pin Signal Name 1 +5 VDC 2 +5 VDC 3 D- 4 D- 5 D+ 6 D+ 7 Ground 8 Ground 9 KEY (no pin) 10 No Connect Table 24.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 26.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.2.2.2 Add-in Card Connectors The board has the following add-in card connectors: PCI Express Full-/Half-Mini Card slot Conventional PCI bus connector (with riser card support for up to two PCI cards) Note the following considerations for the Conventional PCI bus connector: The Conventional PCI bus connector is bus master capable. SMBus signals are routed to the Conventional PCI bus connector.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.2.2.3 Power Supply Connector The board has a 2 x 12 power connector (see Table 27). This board requires a TFX12V or SFX12V power supply. Table 27. Power Connector Pin Signal Name Pin Signal Name 1 +3.3 V 13 +3.3 V 2 +3.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.2.2.4 Front Panel Header This section describes the functions of the front panel header. Table 28 lists the signal names of the front panel header. Figure 12 is a connection diagram for the front panel header. Table 28.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.2.2.4.1 Hard Drive Activity LED Header Pins 1 and 3 can be connected to an LED to provide a visual indicator that data is being read from or written to a hard drive. 3.2.2.4.2 Reset Switch Header Pins 5 and 7 can be connected to a momentary single pole, single throw (SPST) type switch that is normally open. When the switch is closed, the board resets and runs the POST. 3.2.2.4.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.2.2.5 Front Panel USB 2.0 Headers Figure 13 and Figure 14 are connection diagrams for the front panel USB 2.0 headers. NOTE The +5 VDC power on the USB 2.0 headers is fused. Use only a front panel USB connector that conforms to the USB 2.0 specification for high-speed USB devices. Figure 13. Connection Diagram for Front Panel USB 2.0 Header Figure 14. Connection Diagram for Front Panel USB 2.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.3 BIOS Configuration Jumper Block CAUTION Do not move the jumper with the power on. Always turn off the power and unplug the power cord from the computer before changing a jumper setting. Otherwise, the board could be damaged. Figure 15 shows the location of the jumper block. The jumper determines the BIOS Setup program‘s mode.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 30. BIOS Configuration Jumper Settings Function/Mode Jumper Setting Normal 1-2 The BIOS uses current configuration information and passwords for booting. Configure 2-3 After the POST runs, Setup runs automatically. The maintenance menu is displayed. Recovery None The BIOS attempts to recover the BIOS configuration. See Section 4.6.1 for more information on BIOS recovery.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.4 3.4.1 Mechanical Considerations Form Factor The board is designed to fit into a mini-ITX or microATX form-factor chassis. Figure 16 illustrates the mechanical form factor for the board. Dimensions are given in inches [millimeters]. The outer dimensions are 6.7 inches by 6.7 inches [170 millimeters by 170 millimeters].
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.5 Electrical Considerations 3.5.1 Fan Header Current Capability Table 31 lists the current capability of the fan header. Table 31. Fan Header Current Capability Fan Header Maximum Available Current System fan 1.5 A 3.5.2 Add-in Board Considerations The board is designed to provide 2 A (average) of +5 V current for the Conventional PCI slot.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3.6 Power Consumption Power measurements were performed to determine bare minimum and likely maximum power requirements from the board, as well as attached devices, in order to facilitate power supply rating estimates for specific system configurations. 3.6.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Back and front panel host-powered USB devices (other than keyboard and mouse) Load: continuous read/write activity on external drive/peripheral LAN linked at 1000 Mb/s Load: continuous read/write benchmark on remote share All on board peripherals enabled (serial, parallel, audio, …) Table 33. Maximum Load Configuration Current and Power Results 3.7 Output Voltage 3.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 4 Overview of BIOS Features 4.1 Introduction The board uses an Intel BIOS that is stored in the Serial Peripheral Interface Flash Memory (SPI Flash) and can be updated using a disk-based program. The SPI Flash contains the BIOS Setup program, POST, the PCI auto-configuration utility, LAN EEPROM information, and Plug and Play support.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 35 lists the BIOS Setup program menu features. Table 35.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 4.4 System Management BIOS (SMBIOS) SMBIOS is a Desktop Management Interface (DMI) compliant method for managing computers in a managed network. The main component of SMBIOS is the Management Information Format (MIF) database, which contains information about the computing system and its components.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 4.5 Legacy USB Support Legacy USB support enables USB devices to be used even when the operating system‘s USB drivers are not yet available. Legacy USB support is used to access the BIOS Setup program, and to install an operating system that supports USB. By default, Legacy USB support is set to Enabled. Legacy USB support operates as follows: 1.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 4.6 BIOS Updates The BIOS can be updated using either of the following utilities, which are available on the Intel web site: Intel® Express BIOS Update utility, which enables automated updating while in the Windows environment. Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB drive), or an optical drive.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 4.6.2 Custom Splash Screen During POST, an Intel® splash screen is displayed by default. This splash screen can be augmented with a custom splash screen. The Intel® Integrator Toolkit can be used to create a custom splash screen. NOTE If you add a custom splash screen, it will share space with the Intel branded logo. For information about ® Intel 4.7 Integrator Toolkit Refer to http://developer.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 4.7.3 Booting Without Attached Devices For use in embedded applications, the BIOS has been designed so that after passing the POST, the operating system loader is invoked even if the following devices are not present: Video adapter Keyboard Mouse 4.7.4 Changing the Default Boot Device During POST Pressing the key during POST causes a boot device menu to be displayed.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 4.8.2 BIOS Boot Optimizations Use of the following BIOS Setup program settings reduces the POST execution time. In the Boot Menu, set the hard disk drive as the first boot device. As a result, the POST does not first seek a diskette drive, which saves about one second from the POST execution time. In the Peripheral Configuration submenu, disable the LAN device if it will not be used.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 4.9 BIOS Security Features The BIOS includes security features that restrict access to the BIOS Setup program and who can boot the computer.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 5 Board Status and Error Messages 5.1 BIOS Beep Codes The BIOS uses audible beep codes to signal status messages and error messages indicating recoverable errors that occur during the POST. The beep codes are listed in Table 40. These beep codes can be heard through a speaker attached to the board‘s line out audio jack (see Figure 5, B on page 33). Table 40.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 5.2 Front-panel Power LED Blink Codes Whenever a recoverable error occurs during POST, the BIOS causes the board‘s front panel power LED to blink an error message describing the problem (see Table 41). Table 41. Front-panel Power LED Blink Codes Type Pattern BIOS update in progress Off when the update begins, then on for 0.5 seconds, then off for 0.5 seconds.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 5.4 Port 80h POST Codes During the POST, the BIOS generates diagnostic progress codes (POST codes) to I/O port 80h. If the POST fails, execution stops and the last POST code generated is left at port 80h. This code is useful for determining the point at which an error occurred. Displaying the POST codes requires a PCI bus add-in card, often called a POST card.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 44.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 44.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 44.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Table 45.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 6 Assembly/Disassembly Guide 6.1 Introduction Please take a moment to read this manual before you start assembling or disassembling the enclosure. Often times, rushing into unit installation can result in damage to your enclosure, motherboard, and power supply.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 6.3 Board Installation Steps 1. To remove the top lid, remove the screw (encircled in red) from the back, in the right corner, see Figure 17. Push back the top lid ½ inches and after this, gently pull it up. Figure 17 -- Removing the top lid 1 - WiFi antenna hole, 2 - DC Power jack hole 2. Install I/O motherboard shield on the back of the enclosure. 3.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Figure 19 -- J2 (USB Header) and J3 (2x3) pin header, view from the back of Enclosure 6.4 Installing USB devices under the front plate The face plate is designed to conceal USB flash drives, Bluetooth, USB WIFI modules or other USB devices. To add a USB device under the front plate, remove it by carefully pressing outwards and gently pushing, one by one, the plastic lids from the sides (see Figure 20).
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual After installing the desired USB devices, snap back the front plate. 6.5 Installing SSD and Fans Install the SSD using the provided screws. The SSD (and optional coolers) will be fastened onto the SSD Mounting Bracket see Figure 22. On the bracket you can install one 2.5‖ hard drive or two fans (40x40x10mm) pictured below.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 7 Operating System Reference 7.1 Installing Windows* 7 This section provides step-by-step instructions for installing Windows* 7 on platforms based on the Intel® Atom™ Processor N2000 or D2000 Series and Intel® NM10 Express Chipset.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual it. The purpose of this section is thus to provide the instructions necessary for downloading and creating the Microsoft Windows 7 OS and then installing the drivers created by Intel for this platform under Windows 7.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 7.1.2 Downloading and installing processor, graphics, chipset and other optional drivers Though the standard OS may contain several drivers compatible with the platform it is recommended that you install the latest platform drivers found here: http://downloadcenter.intel.com/SearchResult.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Standard 7 includes Windows Vista and Windows 7 features such as Aero, SuperFetch, ReadyBoost, BitLocker Drive Encryption, Windows Firewall, Windows Defender, Address space layout randomization, Windows Presentation Foundation, Silverlight 2, Windows Media Center among several other packages.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Figure 23: Build an image 3. Read and accept the license as shown in Figure 24. Click Next Figure 24: Accept the license terms 4. WES7 allows you to choose from several pre-configured templates when creating your image. Each selection has a different set of driver support and potentially different look and feel for the user interface.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual which installs many of the basic Windows applications (Media Player, Internet explorer, etc.) and drivers necessary for broad application support with the default windows desktop look and feel. Intel recommends that you click View Template on each as shown Figure 25. Figure 25: View template 5.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual You may also choose Do not use a template to create your own customized image with only the drivers and features that you need for your specific product implementation. In that case, select the desired features that you need, and click Next. 6. Select your preferred language and keyboard region as shown in Figure 27. Figure 27: Choose a language and other preferences 7.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 8. The installation will run for several minutes. During this time, the system may restart a number of times. Figure 29: Installing Windows 9. When the install process completes, you will be presented with a login screen, where you can establish a user account and name for your system. Figure 30: Set up Windows - Login 7.2.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual http://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Deskto p+Boards&ProductLine=Intel%c2%ae+NM10+Chipset+Family+Boards&ProductProduct =Intel%c2%ae+Desktop+Board+DN2800MT&DownloadType=Drivers These drivers, in pre-release and release forms are also available in the same package format from https://platformsw.intel.com. Please see your Intel field representative for access.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual early in the installation sequence. Additional information about this issue can be found on the Microsoft website. http://support.microsoft.com/kb/314859 http://support.microsoft.com/kb/916196 Note: Not all USB floppy disk drives are created equal. If you go this route, please read the above support documents from Microsoft to get a list of supported floppy drives. 7.4.2 F6 install with floppy 1.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual c) Press S to Specify Additional Device. The SCSI adapter screen will appear.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual d) Press Enter to Select the Intel® NM10 Express Chipset. The screen titled ―Setup will load support for Intel® NM10 Express Chipset‖ will appear.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual e) Press Enter to continue. The partitions screen will appear.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual f) 7.4.3 Select the C: partition and press Enter. Setup will continue as normal. Slipstream install There are several tools available that can create a slipstream image. This document uses the nLite* 1.4.9.1 tool. 1. Download and install nLite from: http://www.nliteos.com/index.html. 2. Download either the STOR_10.1.0.1008_f6flpy-x86.zip or STOR_10.1.0.1008_f6flpy-x64.zip SATA Driver files from here. 3.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual b. Click on Browse and point to the folder with the Windows XP installation files (from step 4). You will see the information fields populate. Click Next. c. Click Next on the Presets page. d. Select Drivers and Bootable ISO on the Task Selection page. Click Next.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual e. Click Insert Single Driver i. Browse to the Intel Rapid Storage Technology F6 Driver files. ii. Select the iaAHCI.inf file. f. Select the Textmode driver radio button. g. Select the Intel® NM10 Express Chipset in the Textmode integration options pane. h. Click OK. i. On the Drivers page, click Next. j. Click Yes to start the process. k. On the Processing… page, click Next. l.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual n. Name your ISO with a meaningful name, such as: WindowsXPSP3WithNM10Sata.iso o. Click Next. p. Click Finish. 6. Burn the newly generated ISO file to a CD using your favorite tool. 7. Attach a SATA CD ROM or USB CD ROM to Intel‘s CRB. 8. Install Windows XP by selecting the appropriate options in the setup screens. 7.4.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Intel® EMGD is designed to work with fixed-function systems, such as Point-of-Sale (POS) devices, ATMs, gaming devices, In-vehicle Information/Entertainment systems, etc. It can be configured to work with various hardware and software systems. For more information, please refer to the EMGD User‘s Guide bundled with the EMGD Graphics Driver. 7.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 3. Download and install Win32 Disk Imager from: a. https://launchpad.net/win32-image-writer/+download 4. Use Win32DiskImager to put the image on your USB Stick 5. Write the image to the USB stick by selecting Write. 6. Insert the USB stick into the CRB. 7. When you boot the BIOS be sure to select the USB stick as the primary boot drive. 8.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 5. Write the image to the USB stick by selecting Write. 6. Insert the USB stick into the CRB. 7. When you boot the BIOS be sure to select the USB stick as the primary boot drive. 8. When the selection options appear, select the second option to Installation Only option. 9. Follow the prompts to install.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual Intel platform based on the Intel Atom Processor N2600/D2700/N2800 paired with Intel NM10 Express Chipset. For customers evaluating or using the Development Kit as a basis for their embedded design, and Yocto Project* to develop a custom Linux* operating system, as their operating system, this is the primary guidance Intel provides for setting up the drivers and operating system. 7.6.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 6. Write the image to the USB stick by selecting Write. 7. Insert the USB stick into the CRB. 8. When you boot the BIOS be sure to select the USB stick as the primary boot drive. 9. When the Boot: prompt appears, you can type boot at the prompt. If you do not type anything the default behavior will be to boot off of the USB stick. 7.6.3 Install with USB stick 1. Insert and Format the USB stick. a.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 6. Write the image to the USB stick by selecting Write. 7. Insert the USB stick into the CRB. 8. When you boot the BIOS be sure to select the USB stick as the primary boot drive. 9. When the Boot: prompt appears, you must type install to install to the attached SATA drive. a. Note this prompt only remains on the screen for a few seconds, so you need to be prepared for it. 10.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 8 Battery Disposal CAUTION Risk of explosion if the battery is replaced with an incorrect type. Batteries should be recycled where possible. Disposal of used batteries must be in accordance with local environmental regulations. PRÉCAUTION Risque d'explosion si la pile usagée est remplacée par une pile de type incorrect. Les piles usagées doivent être recyclées dans la mesure du possible.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual PRECAUCIÓN Existe peligro de explosión si la pila no se cambia de forma adecuada. Utilice solamente pilas iguales o del mismo tipo que las recomendadas por el fabricante del equipo. Para deshacerse de las pilas usadas, siga igualmente las instrucciones del fabricante. WAARSCHUWING Er bestaat ontploffingsgevaar als de batterij wordt vervangen door een onjuist type batterij.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual AWAS Risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. OSTRZEŻENIE Istnieje niebezpieczeństwo wybuchu w przypadku zastosowania niewłaściwego typu baterii. Zużyte baterie należy w miarę możliwości utylizować zgodnie z odpowiednimi przepisami ochrony środowiska.
Embedded Intel® Atom™ Processor D2700 with Intel® NM10 Express Chipset Development Kit User‘s Manual 114
