Data Sheet

Ethernet Controller I210 —System Manageability
778
Table 10-91. Set ARP Proxy Table Entry Response
10.8.2.4.2.4 Set NS (Neighbor Solicitation) Proxy Table Entry
Note: To set an entry Software driver will post command with Active field set to 0x1. To disable an
entry the driver must post this entry with the Active field set to 0x0. Driver must initially
disable all unused entries.
Byte Name Bit Value Description
0 Command 7:0 0x77 Set ARP proxy command
1 Buffer length 7:0 0x13
2Status 7:00x1
0x0 - Unsupported Table Index
0x1 - Status OK
0x2 - Table Index in use.
0x3 - Unsupported command
0x4 - Checksum Error
0x5 - Buffer Length Error
0x6 to 0xFF - Error
3 Checksum 7:0 Checksum signature
4 Port Number 7:0 Port Number Indicates the port number that the response is for.
5 Sub command 7:0 0x3 Set proxy capabilities
6 ARP proxy version 1 7:0 0x1 ARP version 1 entry
7 Table index 7:0 Index
8 Active 7:0 0x1 or 0x0 Set if entry is active
14:9 MAC Address 7:0
18:15 Local IP Address 7:0
22:19 Remote IP Address 7:0