Data Sheet

System Manageability—Ethernet Controller I210
747
10.6.3.15.8 Get OS2BMC parameters Response (Intel Command 0x41)
Where the Status byte partition is as follow:
10.6.3.16 Get Controller information Command (Intel Command 0x48, Index 0x1)
This command gather the controller identification information and return it back to the MC.
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Manufacturer ID (Intel 0x157)
20 0x41
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Response Code Reason Code
20...23 Manufacturer ID (Intel 0x157)
24...27 0x41 Status
Table 10-79. Status Byte Description
Bits Content
1:0 Reserved
2
Network to MC status
0 = network 2 MC flow is disabled
1 = network 2 MC flow is enabled.
3
OS2BMC status
0 = OS 2 MC flow is disabled
1 = OS 2 MC flow is enabled.
7:4 Reserved.
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Manufacturer ID (Intel 0x157)
20...23 0x48 0x1