Data Sheet

System Manageability—Ethernet Controller I210
745
— 0x0: Dedictated MAC mode
— 0x1: Shared MAC/IP mode.
10.6.3.14.12.1Set Shared Mode Response
The Network Controller shall, in the absence of a checksum error or identifier mismatch, always accept
the Set Shared Mode command and send a response, using the format specified in Table 10-78.
10.6.3.15 OS2BMC Configuration
These commands control enabling of the OS2BMC flow.
10.6.3.15.1 Enable OS2BMC Flow Command (Intel Command 0x40, Index 0x1)
10.6.3.15.2 EnableOS2BMC Flow Response (Intel Command 0x40, Index 0x1)
10.6.3.15.3 Enable Network to MC Flow Command (Intel Command 0x40, Index 0x2)
Table 10-78. Set Shared Mode Response Packet Format
Bits
Bytes 31..24 23..16 15..08 07..00
00..15 NC-SI Header
16..19 Response Code Reason Code
20..23 Manufacturer ID (Intel 0x157)
24..27 0x25 0xB Shared Mode Reserved
48..51 Checksum
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Manufacturer ID (Intel 0x157)
20...21 0x40 0x01
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Response Code Reason Code
20...23 Manufacturer ID (Intel 0x157)
24...25 0x40 0x01