Data Sheet

Ethernet Controller I210 —System Manageability
726
10.6.3.13.2 Enable Checksum Offloading Response (Intel Command 0x23)
10.6.3.13.3 Disable Checksum Offloading Command (Intel Command 0x24)
10.6.3.13.4 Disable Checksum Offloading Response (Intel Command 0x24)
10.6.3.14 Shared MAC and shared IP support commands (Intel Command 0x25)
To meet the requirements introduced by sharing IP addresses, modifications and additions to the NC-SI
command set are required. These changes includes the new commands in this section and the
modifications described in Section 10.3.7.
Note: All the indexes in this command set starts at 1 to match the NC-SI methodology.
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Manufacturer ID (Intel 0x157)
20 0x23
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Response Code Reason Code
20...23 Manufacturer ID (Intel 0x157)
24...26 0x23
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Manufacturer ID (Intel 0x157)
20 0x24
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Response Code Reason Code
20...23 Manufacturer ID (Intel 0x157)
24...26 0x24