Data Sheet

Ethernet Controller I210 —System Manageability
712
10.6.3.6.14 Get Intel Filters — IPv6 Filter Command (Intel Command 0x03, Filter Parameter
0x65)
Note: The filters index range can vary according to the IPv4/IPv6 mode setting in the Filters Control
command
IPv4 Mode: Filter index range: 0x0...0x2.
IPv6 Mode: Filter index range: 0x0...0x3.
10.6.3.6.15 Get Intel Filters — IPv6 Filter Response (Intel Command 0x03, Filter parameter
0x65)
If the IPv6 Filter Index is bigger than 3, a command failed Response Code is returned with Invalid Intel
Parameter Number reason (0x5082).
10.6.3.6.16 Get Intel Filters - EtherType Filter Command (Intel Command 0x03, Filter
parameter 0x67)
20...23 Manufacturer ID (Intel 0x157)
24...27 0x03 0x64 IPv4 Filter Index IPv4 Address (3)
28...29 IPv4 Address (2-0)
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Manufacturer ID (Intel 0x157)
20...22 0x03 0x65 IPv6 Filter Index
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Response Code Reason Code
20...23 Manufacturer ID (Intel 0x157)
24...27 0x03 0x65 IPv6 Filter Index
IPv6 Address (MSB, Byte
16)
28...31 ... ... ... ...
32...35 ... ... ... ...
36...39 ... ... ... ...
40...42 ... ...
IPv6 Address (LSB, Byte
0)