Data Sheet

System Manageability—Ethernet Controller I210
699
10.6.3.3 Set Intel Filters Control — IP Filters Control Command (Intel Command
0x00, Filter Control Index 0x00)
This command controls different aspects of the Intel filters.
Where “IP Filters Control” has the following format.
Note: When using shared MAC and shared IP commands (Section 10.6.3.14), the IPv4 mode should
be enabled.
10.6.3.3.1 Set Intel Filters Control — IP Filters Control Response (Intel Command 0x00,
Filter Control Index 0x00)
10.6.3.4 Get Intel Filters Control Commands (Intel Command 0x01)
10.6.3.4.1 Get Intel Filters Control — IP Filters Control Command (Intel Command 0x01,
Filter Control Index 0x00)
This command reflects different aspects of the Intel filters.
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Manufacturer ID (Intel 0x157)
20...23 0x00 0x00 IP Filters control (3-2)
24...25 IP Filters Control (1-0)
Table 10-35. IP Filters Control
Bit # Name Description Default Value
0IPv4/IPv6 Mode
IPv6 (0b): There are zero IPv4 filters and
four IPv6 filters
IPv4 (1b): There are four IPv4 filters and
three IPv6 filters.
See Section 8.22.9 or Section 10.3.3.7 for
details.
1b
1...31 Reserved
Bits
Bytes 31:24 23:16 15:08 07:00
00...15 NC-SI Header
16...19 Response Code Reason Code
20...23 Manufacturer ID (Intel 0x157)
24...27 0x00 0x00
Bits
Bytes 31:24 23:16 15:08 07:00