Data Sheet

Ethernet Controller I210 —System Manageability
698
Note: All the commands are supported both over NC-SI and over MCTP with pass through.
Note: If an unsupported command is received, an error is returned with a response = Unsupported
(0x3) and reason = Invalid Intel Command Number (0x5081).
0x04
0x00 Set Unicast Packet Reduction (obsolete)
0x01 Set Multicast Packet Reduction (obsolete)
0x02 Set Broadcast Packet Reduction (obsolete)
0x10 Set Extended Unicast Packet Reduction
0x11 Set Extended Multicast Packet Reduction
0x12 Set Extended Broadcast Packet Reduction
0x05
0x00 Get Unicast Packet Reduction (obsolete)
0x01 Get Multicast Packet Reduction (obsolete)
0x02 Get Broadcast Packet Reduction (obsolete)
0x10 Get Extended Unicast Packet Reduction
0x11 Get Extended Multicast Packet Reduction
0x12 Get Extended Broadcast Packet Reduction
0x06 N/A Get System MAC Address
0x20 N/A Set Intel Management Control
0x21 N/A Get Intel Management Control
0x22 N/A Perform TCO Reset
0x23 N/A Enable IP/UDP/TCP Checksum Offloading
0x24 N/A Disable IP/UDP/TCP Checksum Offloading
0x25
0x0 Set IP Address
0x1 Get IP Address
0x2 Set Port
0x3 Get Port
0x4 Enable Unicast Infrastructure Filter
0x5 Get Shared IP Capabilities Command
0x6 Shared IP Enable Broadcast filtering
0x7 Shared IP Enable Global Multicast filtering
0x8 Get Shared IP parameters
0x9 Set Binding
0xA Get Binding
0xB Set Shared Mode
0x40
0x01 Enable OS2BMC flow
0x02 Enable Network to MC flow
0x03 Enable Both Network to MC and Host to MC flow
0x41 N/A Get OS2BMC parameters
0x48 0x1 Get Controller information
Table 10-34.Intel OEM Commands Summary
Intel Command Parameter Command Name