Data Sheet

System Manageability—Ethernet Controller I210
697
10.6.3.2 Intel OEM Commands Summary
Table 10-33. Intel OEM Specific Command Response and Reason Codes
Response Code Reason Code
Value Description Value Description
0x1 Command Failed
0x5081 Invalid Intel Command Number
0x5082 Invalid Intel Command Parameter Number
0x5087 Invalid Driver State
0x5088 Invalid Flash
0x508D
Returned when one of the shared IP commands is received with an out of
range resource (IP, port, binding) index.
0x508E
Returned when a request to disable a port used in a active binding is
received.
0x5090
Returned when a binding of a non enabled resource (MAC, VLAN, IP
address, port) is required.
0x5091
Returned when the Set Port command is received with an unsupported
protocol.
0x5092
Not is Shared Mode. Returned when shared mode commends are used
while not in shared MAC/IP mode.
0x008E
Returned when a request to disable a VLAN or a MAC address used in an
active binding is received.
Table 10-34. Intel OEM Commands Summary
Intel Command Parameter Command Name
0x00 0x00 Set IP Filters Control
0x01 0x00 Get IP Filters Control
0x02
0x0F Set Manageability Only
0x10 Set Flexible 128 Filter Mask and Length
0x11 Set Flexible 128 Filter Data
0x61 Set Packet Addition Filters (obsolete)
0x63 Set Flex TCP/UDP Port Filters
0x64 Set Flex IPv4 Address Filters
0x65 Set Flex IPv6 Address Filters
0x67 Set EtherType Filter
0x68 Set Packet Addition Extended Filter
0x69 Set Special Modifiers Filter
0x03
0x0F Get Manageability Only
0x10 Get Flexible 128 Filter Mask and Length
0x11 Get Flexible 128 Filter Data
0x61 Get Packet Addition Filters (obsolete)
0x63 Get Flex TCP/UDP Port Filters
0x64 Get Flex IPv4 Address Filters
0x65 Get Flex IPv6 Address Filters
0x67 Get EtherType Filter
0x68 Get Packet Addition Extended Filter
0x69 Get Special Modifiers filter