Data Sheet

Programming Interface — Ethernet Controller I210
537
8.24.1 Parity and ECC Error Indication- PEIND (0x1084; RC)
8.24.2 Parity and ECC Indication Mask - PEINDM (0x1088; RW)
Field Bit(s) Initial Value Description
lanport_parity_fatal_ind (LH) 0 0b
Fatal Error detected in LAN port memory.
Bit is latched high and cleared on read.
mng_parity_fatal_ind (RC) 1 0b
Fatal Error detected in management memory.
Bit is latched high and cleared on read.
pcie_parity_fatal_ind (RC) 2 0b
Fatal Error detected in PCIe memory.
Bit is latched high and cleared on read.
dma_parity_fatal_ind (RC) 3 0b
Fatal Error detected in DMA memory.
Bit is latched high and cleared on read.
Reserved 31:4 0x0
Reserved.
Write 0x0 ignore on read.
Field Bit(s) Initial Value Description
lanport_parity_fatal_ind 0 1b
When set and PEIND.lanport_parity_fatal_ind is set, enable interrupt
generation by setting the ICR.FER bit.
mng_parity_fatal_ind 1 1b
When set and PEIND.mng_parity_fatal_ind is set, enable interrupt
generation by setting the ICR.FER bit.
pcie_parity_fatal_ind 2 1b
When set and PEIND.pcie_parity_fatal_ind is set, enable interrupt
generation by setting the ICR.FER bit.
dma_parity_fatal_ind 3 1b
When set and PEIND.dma_parity_fatal_ind is set, enable interrupt
generation by setting the ICR.FER bit.
Reserved 31:4 0x0
Reserved.
Write 0x0, ignore on read.