Data Sheet

Programming Interface — Ethernet Controller I210
531
Field definitions for 1 setting:
DWORD# Address 31 0
00x58B0
IPV6ADDR0
10x58B4
20x58B8
3 0x58BC
4 0x58C0
IPV6ADDR1
5 0x58C4
6 0x58C8
7 0x58CC
8 0x58D0
IPV6ADDR2
9 0x58D4
10 0x58D8
11 0x58DC
12 0x58E0 IPV4ADDR0
13 0x58E4 IPV4ADDR1
14 0x58E8 IPV4ADDR2
15 0x58EC IPV4ADDR3
Field Dword # Address Bit(s)
Initial
Value
1
1. The initial values for these registers can be loaded from the Flash after power-up reset. The registers are written by the MC and
not accessible to the host for writing.
Description
IPV6ADDR0
0 0x58B0 31:0 X
IPv6 Address 0, bytes 1-4 (LS byte is first on the
wire).
1 0x58B4 31:0 X IPv6 Address 0, bytes 5-8.
2 0x58B8 31:0 X IPv6 Address 0, bytes 9-12.
3 0x58BC 31:0 X IPv6 Address 0, bytes 16-13.
IPV6ADDR1
0 0x58C0 31:0 X
IPv6 Address 1, bytes 1-4 (LS byte is first on the
wire).
1 0x58C4 31:0 X IPv6 Address 1, bytes 5-8.
2 0x58C8 31:0 X IPv6 Address 1, bytes 9-12.
3 0x58CC 31:0 X IPv6 Address 1, bytes 16-13.
IPV6ADDR2
0 0x58D0 31:0 X
IPv6 Address 2, bytes 1-4 (LS byte is first on the
wire).
1 0x58D4 31:0 X IPv6 Address 2, bytes 5-8.
2 0x58D8 31:0 X IPv6 Address 2, bytes 9-12.
3 0x58DC 31:0 X IPv6 Address 2, bytes 16-13.
IPV4ADDR0 0 0x58E0 31:0 X IPv4 Address 0 (LS byte is first on the wire).
IPV4ADDR1 1 0x58E4 31:0 X IPv4 Address 1 (LS byte is first on the wire).
IPV4ADDR2 2 0x58E8 31:0 X IPv4 Address 2 (LS byte is first on the wire).
IPV4ADDR3 3 0x58EC 31:0 X IPv4 Address 3 (LS byte is first on the wire).