Data Sheet

Flash Map—Ethernet Controller I210
233
6.8.2 Port Identification LED Blinking (Word 0x04)
Default Flash setting for this word must be 0xFFFF.
6.8.3 Flash Map Revision (Word 0x05)
This word is valid only for device starter images and indicates the version of the Flash map.
6.8.4 OEM Specific (Words 0x06, 0x07)
These words are available for OEM use.
6.8.5 PBA Number (Words 0x08, 0x09)
The nine-digit Printed Board Assembly (PBA) number used for Intel manufactured Network Interface
Cards (NICs) is stored in the FlashiNVM.
Note that through the course of hardware ECOs, the suffix field is incremented. The purpose of this
information is to enable customer support (or any user) to identify the revision level of a product.
Network driver software should not rely on this field to identify the product or its capabilities.
10 Reserved.
9
Client/not a Client NIC. This bit is used by DMIX to verify the NIC is server or client. A team is required to have
server NIC or LOM.
0b = Server.
1b = Client.
8:0 Reserved (set to 00b).
Bit Description
15:12 Reserved.
11:8
Control for LED 2
0001b = Default in STATE1 + Default in STATE2.
0010b = Default in STATE1 + LED is ON in STATE2.
0011b = Default in STATE1 + LED is OFF in STATE2.
0100b = LED is ON in STATE1 + Default in STATE2.
0101b = LED is ON in STATE1 + LED is ON in STATE2.
0110b = LED is ON in STATE1 + LED is OFF in STATE2.
0111b = LED is OFF in STATE1 + Default in STATE2.
1000b = LED is OFF in STATE1 + LED is ON in STATE2.
1001b = LED is OFF in STATE1 + LED is OFF in STATE2.
7:4 Control for LED 1 – same encoding as for LED2.
3:0 Control for LED 0 – same encoding as for LED2.
Bit Description
15:12 Flash major version (decimal).
11:8 0x0 (for the decimal point)
7:0 Flash minor version (decimal).
Bit Description