Datasheet

Datasheet 19
Electrical Specifications
Table 5. V
CC
Static and Transient Tolerance
I
CC
(A)
Voltage Deviation from VID Setting (V)
1, 2, 3, 4
NOTES:
1. The loadline specification includes both static and transient limits except for overshoot allowed
as shown in
Section 2.5.3.
2. This table is intended to aid in reading discrete points on Figure 1.
3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE
lands. Voltage regulation feedback for voltage regulator circuits must be taken from processor
V
CC
and V
SS
lands. Refer to the Voltage Regulator-Down (VRD) 11.0 Processor Power Delivery Design
Guidelines For Desktop LGA775 Socket
for socket loadline guidelines and VR implementation details.
4. Adherence to this loadline specification is required to ensure reliable processor operation.
Maximum Voltage
1.30 mΩ
Typical Voltage
1.38 mΩ
Minimum Voltage
1.45 mΩ
0 0.000 -0.019 -0.038
5 -0.007 -0.026 -0.045
10 -0.013 -0.033 -0.053
15 -0.020 -0.040 -0.060
20 -0.026 -0.047 -0.067
25 -0.033 -0.053 -0.074
30 -0.039 -0.060 -0.082
35 -0.046 -0.067 -0.089
40 -0.052 -0.074 -0.096
45 -0.059 -0.081 -0.103
50 -0.065 -0.088 -0.111
55 -0.072 -0.095 -0.118
60 -0.078 -0.102 -0.125
65 -0.085 -0.108 -0.132
70 -0.091 -0.115 -0.140
75 -0.098 -0.122 -0.147
78 -0.101 -0.126 -0.151
85 -0.111 -0.136 -0.161
90 -0.117 -0.143 -0.169
95 -0.124 -0.150 -0.176
100 -0.130 -0.157 -0.183
105 -0.137 -0.163 -0.190
110 -0.143 -0.170 -0.198
115 -0.150 -0.177 -0.205
120 -0.156 -0.184 -0.212
125 -0.163 -0.191 -0.219