Information

Intel® Joule
TM
Module
Technical Specifications
PHYSICAL
Dimensions
70 x 85 mm
Operating temperature
32 to 158°F (0 to 70°C)
INTERFACES
Micro HDMI connector Micro-SD* card slot
USB 3.0 Type A connector MIPI* display connector
USB 3.0 Type C connector RTC battery holder
3 Buttons: DnX boot, general purpose, and power
LEDs (1 power, 4 general purpose)
Two 2x20 pin breakout connectors:
- 19.2 MHz and 32.768 kHz clocks
- 2 SPI interface
- 4 UARTs, 3 full and 1 half
- I2S interface
- 5 I2C interfaces
- 2 digital microphone interfaces
- 8 dedicated GPIOs with reference BIOS/IFWI
- 4 PWM ports
POWER DELIVERY
DC Jack
USB Type C
Expansion Board for the Intel® Joule
TM
Module
The expansion board is intended to breakout all I/O interfaces
from the Intel® Joule
TM
module into easily accessible connectors.
All board design les are open source to enable end-users and
hardware ecosystem partners to design custom expansion boards
for the Intel Joule module.
Proven schematics and layout recommendations can reduce custom
expansion board fabrication risks and costs.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS
IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY
EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR
INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS OTHERWISE AGREED IN WRITING BY INTEL, THE INTEL PRODUCTS ARE NOT DESIGNED NOR INTENDED FOR
ANY APPLICATION IN WHICH THE FAILURE OF THE INTEL PRODUCT COULD CREATE A SITUATION WHERE PERSONAL INJURY OR DEATH MAY OCCUR.
Intel may make changes to specications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked “reserved” or
“undened.” Intel reserves these for future denition and shall have no responsibility whatsoever for conicts or incompatibilities arising from future changes to them. The information here is subject to change
without notice. Do not nalize a design with this information.
The products described in this document may contain design defects or errors known as errata which may cause the product to deviate from published specications. Current characterized errata are available
on request. Contact your local Intel sales oce or your distributor to obtain the latest specications and before placing your product order. Copies of documents which have an order number and are referenced in
this document, or other Intel literature, may be obtained by calling 1-800-548-4725, or by visiting Intel’s Web site at www.intel.com.
Copyright © 2016 Intel Corporation. All rights reserved. Intel and the Intel logo are trademarks of Intel Corporation in the U.S. and/or other countries.
* Other names and brands may be claimed as the property of others. Printed in USA. Please Recycle.