Datasheet

Graphics Specifications
August 2016 Intel® Joule™ Datasheet
Document number: 566641 rev. 1.0 Page 14
4.2 Graphic encoder and decoder support
Note: Specific formats and configurations may require software support for the chosen operating system.
4.3 HDMI* signal group specifications
The Intel Joule module provides a HDMI 1.4b interface through the board-to-board connectors for expansion board usage.
Refer to the Intel® Joule™ Expansion Board Design Guide for the specifications and PCB routing guidance for this interface.
4.4 MIPI*-DSI signal group specifications
The Intel Joule module provides a 4-lane MIPI-DSI interface through the board-to-board connector for expansion board use.
Refer to the Intel® Joule™ Expansion Board Design Guide for the specifications and PCB routing guidance for this interface.
Table 7 Graphics engine encoders and decoders supported
Format Decode Level Encode Level
H.264
Profiles: CBP, MP, HP Level: L5.2 up to 1080p240, 4kx2kp60 (2x)
Bit-rate up to 250 Mbps
Profiles: CBP, MP, HP Level: L5.2 up to 1080p240, 4kx2kp60 Bit-rate:
up to 250 Mbps
MVC
CBP, MP HPL5.2 up to 4kx2kp60 CBP, MP HPL5.1 up to 4kx2kp30
VP8
Up to 4kx2kp60 1080p60
VP9
Up to 4kx2kp60 Up to 720p60, 1080p30
MPEG2
HD MPHL (1080p60) HD MPHL (1080p30)
VC-1
AP L4 (1080p60)
WMV9
MP HL (1080p30)
JPEG/MPEG
1067 Mpps (420), 800 Mpps (422)
at 400MHz, 25% non-zero coefficients)
1067 Mpps (420), 800 Mpps (422) (at 400MHz, 25% non-zero
coefficients)